B Preset buttons 1, 2, 3, 4, 5 |
Store station - Keep button depressed |
during radio operation until the station |
becomes audible again. |
Recall station - Briefly press the re- |
spective button. |
Important information
What you need to know!
Before starting to use your new car radio you should carefully read through the information on “Traffic safety” and
Do not connect the loudspeaker outputs to ground!
Only use the accessory and replacement parts approved by Blaupunkt.
Coding - Read the |
chapter first. |
Buttons 1 - 4: Use to enter a code num- |
ber. |
Press each of the buttons until the |
code to be found in the car radio pass- |
port is shown on the display. |
C“Balance” knob
To adjust the volume of the left and right channel
D“Tone” knob Sound control knob
Traffic safety
Traffic safety has always priority. Use your car radio in such a manner that you are always able to cope with and react to the prevailing traffic situation at any given time. Remember, even at 50 km/h you are still moving at a speed of 14 m per seconds.
It is also very important that you are able to hear, and react to, acoustic warning signals around you, for example from the police or the firebrigade.
Therefore, adjust the volume reasonably.
Installation/connection
The code system can only be switched on and off, if the radio is connected to perma- nent power.
If you like to install your new car radio by yourself or add other audio components to the existing ones, then please read carefully the enclosed instructions on installation and connection.
14