Blaupunkt CD30 operating instructions Radio Operation, Radio operation

RADIO OPERATION

Radio operation

Switching to the radio mode

If you are currently using the CD player or CD changer,

➮press CD•C 8 repeatedly until “RADIO” appears in the display.

Selecting wavebands/memory banks

Using this car audio system, you can tune into radio stations on the FM and AM wavebands. There are three mem- ory banks for the FM waveband and one memory bank for AM. You can store five stations in each of these memory banks.

Selecting FM

➮To switch between the FM wave-

bands FM1, FM2 and FMT, press FM 2.

Selecting AM

➮To switch between the AM wave- band, press AM 6.

Tuning into radio stations

You can tune into radio stations in a number of different ways.

Automatic seek tuning

➮Press or :.

The radio will tune into the next availa- ble station within reception range.

Adjusting seek tuning sensitivity

It is also possible to adjust the sensi- tivity of the seek tuning function. In this way you can adjust the radio to tune into stations with strong reception signals only, or to those with weaker reception signals as well.

➮Press MENU <.

➮Press : repeatedly until “SENS” appears in the display.

➮Press:.

The currently selected setting will ap- pear in the display. “SENS HI” indicates the highest level of sensitivity, “SENS LO” the lowest. If you select “SENS LO”, lo will light up in the display.

➮Press: to adjust the desired sensitivity.

➮Once you have made your selec- tion, press MENU <.

Manual station tuning

You can also tune into radio stations manually.

➮Press or:.

Storing radio stations

Storing radio stations manually

➮Select the desired FM memory bank FM1, FM2, FMT or the AM waveband.

➮Tune into the radio station you would like to store.

10