Blaupunkt CD52 7 642 285 310 External Audio Sources, External audio sources, Technical data

EXTERNAL AUDIO SOURCES TECHNICAL DATA

External audio sources

In addition to the CD changer, you can also connect up a different external au- dio source with a line output. Such sources can be, for example, portable CD players, minidisc players or MP3 players.

If there is no CD changer connected to your unit, two external audio sources can be hooked up.

The AUX output has to be switched on in the install menu.

To connect up an external audio source, you will need an adapter cable, obtain- able from any authorised Blaupunkt dealer.

Switching the AUX input on/off

➮Press the MENU button 8. “MENU”appears on the display.

➮Press the button : repeatedly until “AUX-IN-1 OFF”or “AUX-IN-1 ON”appears on the display.

For the second AUX input, a “2”will be displayed instead of a “1”. If a CD chang- er is connected, only input “2” will be available.

➮Press the or button : to switch AUX on or off.

➮Press the MENU button 8 or OK ; once you have completed the setting.

Note:

When the AUX input is switched on, it

can be selected using the SRC button @.

Technical data

Amplifier

Output power:	4 x 26 watts sine
	in accordance
	with DIN 45 324 at
	14.4V,
	4 x 50 watts max.
	power

Tuner

Frequency ranges:
FM	:	87.5 - 107,9 MHz
AM	:	530 - 1 710 kHz

FM transmission range:

20 - 16 000 Hz

CD

Transmission range:

15 - 20 000 Hz

Pre-amp output

4 channels: 4 V

Input sensitivity:

AUX 1 input	: 2 V / 6 kΩ
AUX 2 input	: 775 mV / 10 kΩ

Tel/Navi reception : 10 V / 560 Ω

Subject to changes!

26