Blaupunkt CHARLOTTE CR148 manual Cassette Tape Player Operation

Manual Tuning.

Press A or V for more than l/2 second and frequency will go one channel/step in direction pressed. Press and hold causes continuous manual tuning. Unit returns to seek tuning mode after 4 seconds or after storing a station on a preset.

Preset Station Storage

After tuning desired frequency on desired band, press and hold a Preset Button for more than 2 seconds to store current frequency. Audio is muted during storage, preset number appears, and beep acknowledges storage.

Preset Station Selection

Press desired Preset Button.

Travelstore

In any FM Bank, press SCA/TS for 2 seconds to activate FM Travelstore. (In AM Bank, press it for 2 seconds to activate AM Travel Store.) TS appears. Beginning at the bottom of the band, TS stores five relatively strong stations (in FM on the FMT Band) and returns to preset 1. Pressing any tuning-related button cancels search operation.

Station Scan Tuning

Press SCA. Frequency blinks (along with preset number if appropriate) during scanning. Unit stops at receivable stations for 4 seconds. Unit continuously scans until user stops scan by pressing SCA, another tuning button or SRC.

Cassette Tape Player Operation

Tape Playback:

3

•Insert cassette into Cassette Door. (Note: Make sure that the side of the cassette exposed is facing right and that all slack has been removed from the tape prior to insertion.)

•If ignition switch is already in “on” or accessory position, insertion of cassette will turn unit on. If unit already turned on, cassette insertion will override other audio source, such as radio. “LOAD” appears for 2 seconds. Cassette play will begin, and the display will indicate which tape program is in use, “1” or “2”.

•The tape will continue to play until ejected, SRC button pressed, or unit turned off.

Ejecting The Tape

Press the eject button completely towards the face of the unit. The tape will eject. If uit is turned on, EJ will appear in the display for 2 seconds and the last-heard radio station will play.

Tape Program Change		.	_.
•	Automatic Change (Autoreverse): When the end of the tape is reached, the unit will
	automatically reverse direction and play the other side of the tape.
•	Manual Change: To manually reverse tape direction, press both PROG (program) Buttons (FR
	& FF) at the same time.
•	The change in direction and in tape program will be confirmed in the display (“1”or “2”).

Fast Winding

•To Fast-Rewind the tape, press the FR Button. Tape rewinds and Q* blinks in the display.

•To Fast-Forward the tape, press the FF Button. Tape fast-forwards and D* blinks in the display.

•To stop fast-winding, press the other fast winding button, FR or FF.

Radio Monitor

During tape winding, the radio will play the most-recently heard radio frequency. All frequencies stored on the current bank of preset stations are accessible during fast winding.

Dolby B Noise Reduction

Press Dolby button when playing tapes recorded with the Dolby B noise reduction system to eliminate hissing noise. The Dolby symbol appears in the display. To cancel, press again. Note: Dolby on/off not active in Fast-Winding mode (Preset 5 is instead).

Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

15