Instructions – general operation
See “Traffic safety and precautions” on page 22.
”Press” means a momentary press of less than 1/2 second. All presses requiring more than 1/2 second are followed by a beep.
”Time Out” - When additional button presses are anticipated to complete a procedure, the unit will automatically exit the procedure after 4 seconds of inactivity (8 seconds in the DSC mode).
Ignition on
The unit lights up and the clock is displayed, provided it has been set before. Otherwise, “12:00” appears. How to set the clock is described under “DSC Menu”.
Demo mode
The unit is programmed to scroll some key features across the display if no button is presses for one minute. To turn this off, turn the unit on and press DIS for 8 seconds until ”DEMO OFF” appears. Pressing DIS for 8 seconds again will
Power on
When the ignition on, press ON or insert a tape to turn the unit on. The
Audio source
Use SRC to select the audio source: radio or cassette (if already inserted,) CD changer (if connected) and/or external unit (“AUX IN” display).
Display options
When turning on the audio source, various displays are shown in sequence.
Radio: | Station name (if named) |
Cassette: | “TAPE 1” or “TAPE 2” |
CDC: | Disc name (if named) or disc no. |
| elapsed play time |
AUX: | “AUX IN” |
Press DIS repeatedly to select the display you wish to see permanently.
Power off
Press ON for more than 1/2 second to turn the unit off.
Release for detachable faceplate
Push REL (release) to detach the face. An already inserted cassette remains in the unit. The current settings and the source mode are stored. If power was not switched off before removing the face, the unit will automatically
26
