Changer control (when optional CD changer is connected)
Permissible combinations of MIX and RPT
Pressing MIX during RPTII mixes all of the tracks within one disc continuously. To cancel this combination, press RPT once and MIX twice.
Pause
To pause, press 
. “PAUSE” appears. To resume playback, press
again.
Track scan
Press SCA to start track scan. “TRCKSCAN” appears. The track number and the elapsed play time blink during the scanning operation. The unit scans each track. The scan time can be varied (see Chapter “DSC Menu”). After scanning all tracks on the disc, the unit advances to the next disc. The unit continuously scans until the user stops scan by pressing SCA.
Disc scan
Press SCA for more than 2 seconds to start disc scan. “DISCSCAN” appears. The disc names (or if unnamed, the disc numbers) blink during the scanning operation. The unit scans each disc. The scan time can be varied (see Chapter “DSC Menu”). The unit continuously scans until the user stops scan by pressing SCA.
Changer reset
In the unlikely case of CD changer trouble, reset the CD changer by turning the unit’s power and/or ignition off, and then turn the unit on again.
Programming tracks with TPM (Track Program Memory)
This feature allows you to play only those tracks you want to hear.
1.In CD changer mode, select the disc you want to program.
2.During regular play mode only, select the track to be added to the program. (TPM must be off.)
3.Press and hold TPM until “TPMSTORE” appears. The plus symbol (+) will appear in left- most display position. This indicates that the disc track is programmed.
4.Select the next track to be programmed using the 
and 
buttons. Press and hold TPM until “TPMSTORE” appears.
5.Select other discs as desired using the 
/ 
controls and repeat the steps
Running track program
Press TPM to activate the TPM program. “TPM” appears. If TPM is pressed when no programming has been entered, “NO PROG” appears. PressTPM again to cancel this function. The TPM indicator disappears.
TPM track up/down
To advance and go back within the program, use the 
and 
buttons.
TPM disc up/down
Pressing 
or 
during TPM play advances to the next disc that has been programmed.
TPM scan
Press TPM to start the TPM program. Press SCA. “TRCKSCAN” appears briefly. The track number and the elapsed play time blink during the scanning operation. The programmed tracks will be scanned in order starting with first programmed track. Press SCA to end scan and to listen to the desired track.
DEUTSCH
ENGLISH
FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
31
