Sony KV-27HSR10 Power, Auto PGM, Receivable channels of this TV are, To check preset channels

POWER

1 Press POWER on the TV or the Remote Commander to turn the TV on.

appropriatePress CABLEmodeso thatappearsthe .

	CABLE				l			c31
Remote sensor	% To
			preset	VHF	or UHF	To preset		cable TV
		channels				channels
	Press	ANTIAUX according	to the channel			to he preset.
	-1
	ANT/AUX				3			31
	_-_	To	preset	VHF,	UHF	To	preset	pay cable
		or	regular	cable		TV	channels
		13/channels
r- oE3-	4 Press	AUTO PGM.
	AUTO
	PGM

"AUTO PROGRAM" is displayed on the screen and receivable channels (other than the channels already preset) will be preset in numerical sequence. The channels previously preset remain in the unit's memory.

When no more channels can be found, the programming stops and the lowest numbered channel is displayed.

Receivable channels of this TV are:

VHF: 2-13

UHF: 14-69

Cable: 1-125

To add the channels that could not be preset with automatic programming because their signal strength was too weak, or to erase unnecessary channels.

Follow the steps in "To preset only the desired channels or to erase unnecessary channels" on the next page.

To check preset channels

Press CH +1-.

If the indication "VIDEO 1, VIDEO 2, VIDEO 3" is displayed on

the screen

Press the TV/VIDEO button on the TV. or the TV button on the

Remote Commander so that a channel number appears.

16