Disturbances in picture and sound can often be eliminated by checking the symptoms and following the suggestions listed below.
SYMPTOM
Poo_ or no picture (Screen not lit), good sound
Good picture, no sound
No picture (screen not lit), no sound
No color
Snow and noise
only
CHECK AND ADJUST
•Adjust PICTURE.
•Adjust BRIGHT.
•Check antenna/cable connections.
•Press VOLUME + on the TV or VOL + on the Remote Commander.
•Press MUTING on the Remote Commander.
•Check that the MTS button is set correctly.
•Check that the TV/VIDEO button is set correctly.
•Set the SPEAKER SW (switch) to ON.
•Is POWER switched on?
•Plug the unit into a wall outlet.
•Check that the TV/VIDEO button is set correctly.
•Is it a color program?
•Adjust COLOR.
•Is it an active or the correct channel?
•Check the CABLE setting.
•Check the ANT/AUX button setting.
•Check antenna/cable connections.
r |
| _ | - | . _. € . | Dotted |
|
| ||||
lines | |||||
, |
| _ |
| _ _ | or |
i _' [ _"_"_UJ | |||||
t ,, | stripes | ||||
I | _ |
|
| Double | |
|
|
|
| '_ | orimagesghosts |
This is often caused by local interference. (e.g. cars, neon signs, hairdryers etc.) Adjust antenna for minimum inter- ference.
Reflections from nearby mountains or buildings often cause this problem.
A highly directional outdoor antenna or a CATV cable
may improve the picture.
Try another channel. It could be station trouble.
If the problem persists, contact your nearest service facility.
Sony Corporation Printed in U.S.A
