Manuals / Peavey / Musical Instruments & Equipment / Musical Instrument Amplifier

Peavey 500 Ground polarity switch, Reset/circuit breaker switch, Speaker output jacks, Preamp out

Models: 500

1 32
Download 32 pages 6.36 Kb
Page 7
Image 7

Rear Panel

30

27

28

29

31

32

33

34

35

36

37

38

39

40

41

42

27 ground polarity switch

The ground switch is a 3-position‚ rocker-type switch. Under normal operation it should be in the center (zero) position. If hum or noise is present with the ground switch in the center position‚ place the ground polarity switch to positive or negative (+ or -) to minimize hum. Should a problem continue‚ consult your authorized Peavey dealer‚ the Peavey factory or a qualified service technician. Note: The ground switch is not functional on 220/240 Volt models.

28 reset/circuit breaker switch

Use this switch to restore power to the unit when the internal breaker is tripped. Turn the power switch to the off position before resetting the breaker. To reset‚ push the reset button in and release it. Turn the unit back on and confirm that the power LED is on. If the breaker is tripped again upon power-up‚ consult your authorized Peavey dealer‚ the Peavey factory or a qualified service technician.

29 IEC connector/detachable line cord

For your safety‚ we have incorporated a detachable‚ 3-wire line (mains) cord with proper grounding facilities. It is not advisable to remove the ground pin under any circumstances. If it is necessary to use the amp without proper grounding facilities‚ a suitable grounding adapter should be used. Refer to the back of your amp for the proper voltage requirements before connecting to a power receptacle.

30 speaker output jacks

There are two 1/4" jacks and one Neutrik type jack that provide the powered signal from the amplifier. Each connector is electrically the same (parallel). Use one of the jacks to connect your speaker cabinet and the other to add a second speaker cabinet in parallel. The minimum speaker load impedance is 2 Ohms or two 4 Ohm speakers in parallel.

Warning: To prevent the amplifier from overheating‚ the front and rear fan vents should remain clear of obstructions.

31 power amp input

Used to connect a line level signal to the power amplifier (i.e. external preamp). This jack‚ when used‚ disconnects the internal preamp.

32 preamp out

The preamp output can be used to route the amplified signal to a mixing console‚ tape recorder or other device. Connect the preamp output using a shielded cable to an input of one of these devices. This does not affect the operation of the amplifier. The preamp out and power amp in jacks can also be used as a line level effects patch point.

33 remote jack switch

Provided for an optional footswitch. Allows remote selection of the input mute and the effects loop. Mute switch on front panel must be depressed to the IN position for the footswitch to function properly.

34 effects return

Input for returning signals from an external low-level effects device or signal processing unit.

7

Page 6 Page 8
Page 7
Image 7
Peavey 500 Ground polarity switch, Reset/circuit breaker switch, IEC connector/detachable line cord, Speaker output jacks
Page 6 Page 8

500 specifications

The Peavey 500 is a powerful and versatile amplifier that has garnered praise from musicians and audio engineers alike. Known for its robust performance and reliability, the Peavey 500 is designed for a variety of applications, including live performances, studio recordings, and worship settings. With a blend of innovative technologies and practical features, this amplifier stands out in the crowded market of pro audio equipment.

One of the key features of the Peavey 500 is its impressive power output. Offering substantial wattage, this amplifier is capable of driving even the most demanding speaker systems with ease. Competitively designed to handle both high and low frequencies, it ensures clarity and fullness of sound, making it an excellent choice for bassists and guitarists who require punchy, dynamic tones.

The Peavey 500 incorporates several exclusive technologies to enhance its performance. One such innovation is Peavey’s proprietary TransTube technology, which emulates the warm, harmonic-rich tones of vacuum tube amplifiers. This allows musicians to achieve a rich and vibrant sound without carrying the weight and maintenance demands of traditional tube amps.

In addition to its sound quality, the Peavey 500 is equipped with built-in EQ controls, allowing users to tailor their sound to suit different performance environments. Its comprehensive tone-shaping capabilities include bass boost, midrange adjustments, and treble controls, enabling precise sound customization. This flexibility is crucial for musicians who often perform in varied acoustic spaces.

Durability is another hallmark of the Peavey brand, and the Peavey 500 is no exception. Engineered with high-quality components and a rugged construction, this amplifier is built to endure the rigors of frequent transportation and heavy use. From the solid chassis to the robust input and output connectors, every aspect of the Peavey 500 reflects a commitment to long-lasting performance.

Furthermore, the amplifier features multiple input options, including standard quarter-inch jacks and XLR connections, ensuring compatibility with a wide range of instruments and audio sources. The versatility of the Peavey 500 is further enhanced by options for direct outputs, making it easy to connect to recording systems or external mixers.

Overall, the Peavey 500 stands as a testament to Peavey’s dedication to quality and innovation in the music industry. With its powerful output, advanced technologies, and user-friendly features, it continues to be a go-to choice for musicians seeking reliability and exceptional sound in their performances. Whether on stage or in the studio, the Peavey 500 delivers the performance that professionals expect and deserve.