NOTES / ACCESSORIES | FITTING/REMOVAL |
Important notes
This device is not intended for fitting in the forward section of the passenger compartment where it could also be seen by the driver. Fitting this device in any part of the vehicle where it could interfere with or distract the driverÕs at- tention is dangerous and is not permit- ted. The manufacturer cannot accept responsibility for any damage caused as a result of improper fitting of this de- vice.
To avoid the risk of electrical shock, the device must be protected from water and moisture, and must not be opened. Dangerously high voltages are generated inside the device.
We wish to point out that the right to claim against warranty is invalidated by any changes or modifications to the device that have not been explicitly ap- proved by the manufacturer.
Accessories supplied
Connecting cable
Extraction tool
Operating instructions
Fitting
Note
It is recommended that the fitting is car- ried out at a specialist workshop.
Prepare the working area
➮Remove the headrest, and place it on a working surface that has been cleared and cleaned, where the further assembly procedures may be carried out.
Note:
Take appropriate action to ensure that the headrest is not damaged while fit- ting the monitor.
14
