FITTING/REMOVAL
Mark out the dimensions
➮Feel the covering of the headrest carefully to ensure that there are
no invisible parts that would pre- vent the monitor from being fitted.
Use the cardboard template provided to mark out the area that will need to be cut.
ENGLISH DEUTSCH
Carefully cut open the headrest cover
Use a knife with an adjustable cutting depth to cut out the planned area.
➮Make the first cut inside the marked area at a point about
0.5 cm from one of the corners, then make a diagonal cut to a point about 0.5 cm from the opposite corner.
➮Make a similar cut between the other two diagonally opposed cor- ners.
Open the headrest and remove filling and other items
➮Carefully lift the covering material away from the cut area.
➮Adjust the cutting depth of the knife to about 2.5 cm, and cut into the headrest following a line about
0.5 cm inside the marked edge.
➮Carefully lift the filling material at one corner, and cut deeper into the material with the knife.
➮Remove the filling material in small pieces.
➮As you do this, lift one piece of the filling material, and ensure that the cut is being made to an even depth.
To remove other pieces, use a Dremel saw or another suitable tool.
FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS DANSK
15
