Blaupunkt MD70 External audio sources, Pre-amplifier / subout, Switching the AUX input on and off

EXTERNAL AUDIO SOURCES PRE-AMPLIFIER / SUBOUT

External audio sources

Instead of the CD-changer, you can connect an external audio source with line output. Such sources might be a portable CD player, a MiniDisc player or an MP3 player.

The AUX input must be switched on in the menu.

You need an adapter cable to connect an ex- ternal audio source. You can obtain such a cable from your Blaupunkt dealer.

Switching the AUX input on and off

➮Press the MENU button, 8.

➮Press the button, 7, as often as is necessary for “AUX OFF” or “AUX ON” to appear in the display.

If “AUX ON” is displayed, the input has al- ready been switched on.

➮Press the or buttons, 7, in order to switch AUX on or off.

➮Press the OK button, 5 or the MENU button, 8, to leave the menu. The set- tings are then saved.

Note:

If the AUX input is switched on it can be se- lected with the CDC button, =.

Pre-amplifier / subout

You can use the connections provided on your car radio to connect an external pre-amplifier and a subwoofer.

We recommend that you use matching prod- ucts from the Blaupunkt or Velocity ranges.

Switch-on delay for external pre- amplifiers

To prevent speakers from crackling when you switch on the player, you can set a switch-on delay for all amplifiers connected to the Pre- amp Out connection. The maximum delay is four seconds.

➮Press the MENU button, 8.

➮Press the or button, 7, as often as is necessary for “AMP DLAY” to ap- pear in the display.

➮Press the or buttons, 7, in order to adjust the switch-on delay.

“DLAY OFF” means that there is no switch- on delay, while “DELAY 1” to “DELAY 4” indi- cate the delay time in seconds.

➮Press the OK button, 5or the MENU button, 8, to leave the menu. The set- tings are then saved.

ENGLISH

27