RADIO MODE
➮Press the MENU button 8.
➮Press the 
or 
button 7 re- peatedly until “SENS” and the cur- rently set value appear in the dis- play.
“SENS HI6” means that the tuner is set to the highest sensitivity setting. “SENS LO1” means it is set to the lowest sen- sitivity setting.
➮Set the desired sensitivity using
the 
buttons 7.
When you have finished adjusting the setting,
➮press the MENU button 8.
Storing stations
Storing stations manually
➮Select the desired memory bank FM1, FM2, or FMT.
➮Tune into the station that you want.
➮Press and hold down one of the station buttons 1 - 6 :for longer than two seconds to assign the station to that button.
Storing stations automatically (Travelstore)
You can automatically store the six sta- tions providing the best reception in the region (only FM). The stations are stored in the FMT memory bank.
Note:
●Any stations previously stored in this memory bank are deleted in the process.
➮Press and hold down the BND•TS button ;for longer than two sec- onds.
The storing procedure begins. “FM TSTORE” appears in the display. After the process has completed, the radio will play the station that is stored in memory location 1 of the FMT memo- ry bank.
Listening to stored stations
➮Select the memory bank or wave- band.
➮Press the station button 1 - 6 : that corresponds to the station that you want to listen to.
Scanning receivable stations (SCAN)
You can use the scan function to listen to all the receivable stations briefly. You can set the scanning time in the menu to between 5 and 30 seconds (in steps of 5 seconds).
Starting SCAN
➮Press and hold down the MENU button 8for longer than two sec- onds.
Scanning begins. “SCAN” appears briefly in the display followed by a flash- ing display of the current station name or frequency.
ENGLISH
37
