Blaupunkt MP41 Direct Access to Memorized Disc Names via Disc call, Erasing the CDC disc names

Erasing the CDC disc names

1.	Press the	DISP	for more than 2 seconds during CD
2.	changer mode.
	Press the	MUTE / SENS .
3.	The disc name or “ _ _ _ _ _ _ _ ” is now flashing.
	Rotate the dial to select the name that you want to erase.
4.	To erase all the names, display “ ✳ALL DELETE✳ ”.
	Press the	DISP for more than 2 seconds.
	Repeat steps 3. and 4. if you want to erase other names.
5.	To return to the normal CD playback mode, Press DISP .

Direct Access to Memorized Disc Names via Disc call

You can search for the memorized disc names in the memory.

1.	Press the	DISP to display the “DISC CALL” on the display
	window.
2.	Rotate the large dial to select the desired disc name.
3.	Press the	MUTE / SENS to start playback for the desired sta-
	tion.

IDC A09 Changer:

The IDC A09 is a 5-disc CD Changer. When using the Folder

+& – keys, it is possible to mistakenly ask the IDC A09 for a CD Disc higher than the number 5 (Five).

When this command is manually done in error, the San jose’s Display will read disc numbers above 5, but the unit will then only play but a few seconds of the next disc, which would be Disc 1, whereas the Display is reading disc number 6 (Six) which does not exist. Choosing a vacant / empty IDC A09 disc slot will result in a “No Magazine” or a double dashes (– –) message in the LCD.

Do one of the following remedies:

Manually select the desired disc at the Changer’s controls, Or allow the IDC A09 to automatically cycle to the next disk after the completion of Disc #5,

Or Press Folder + or – until Disc 1 (One) or the desired disc is displayed in the receivers LCD.

ENGLISH

E-13