Blaupunkt RCR 45 operating instructions Appendix, Overview of the DSC factory settings, Care notes

RM	(Radio Monitor)
	With RM-ON, the unit will
	automatically switch to the
	tuner whenever the casset-
	te is fast winding.
	RM-OFF - The function is
	switched off.
LOCAL	(lo)
	To adjust the seek tuning
	sensitivity for local recepti-
	on.
	LOCAL 1 - high sensitivity
	LOCAL 3 - low sensitivity
DIS	(dx)
	To adjust the seek tuning
	sensitivity for distant recep-
	tion.
	DIS. 1- high sensitivity
	DIS. 3- low sensitivity
LEARN KC	To “define” a second Key-
	Card for use with the set.
	Please read the information
	under “KeyCard theft-pro-
	tection system”.

To quit the DSC programming mode and store the adjustment:

•Press DSC.

If the setting remains unchanged within 8 seconds, the system will automatically store the last adjustment. The display will switch back to the previous condition.

Overview of the DSC factory settings

TA VOL	: 4
BEEP	: 3
LED (Code) : 1
LOUD	: 4
RM	: OFF
LOCAL	: 1
DIS	: 1

Appendix

Care notes

Mechanism/cassette tapes

To avoid possible problems, you should not use cassette tapes longer than 60 or 90 minutes (C60/C90). Store your tapes in a cool place away from dirt, dust and tempera- tures exceeding 50 ° Celsius. Allow very cold tapes to warm up before playing them in order to avoid uneven tape transport. After approximately 100 hours of use, dust partic- les collected on the playback head or roller may lead to tape run problems and sound distortions.

Use a head cleaning tape to remove normal dirt build-up. For tougher cases, use a cotton swab (Q-Tip) soaked with alcohol. Do not attempt to clean by inserting a hard object into the player!

30