Automatically storing the stron- | Scanning stored stations | ||
gest stations with Travelstore | with Preset Scan | ||
You can automatically store the six most | You can have all of the stored stations played | ||
powerful FM stations of your current recepti- | briefly on all wavebands. | ||
on area sorted according to their signal | On FM, you can scan the stations of the | ||
strength. This function is particularly conve- | Travelstore memory bank or of the two other | ||
nient on longer trips. | storage levels. | ||
• Press the FMT button for more than | • | Select the waveband. | |
2 seconds. | • On FM, choose Travelstore or another | ||
The radio will search for the strongest FM | |||
| memory bank using the FMT button. | ||
stations and store them on the memory bank | To start Preset Scan: | ||
T (Travelstore). When this process has been | |||
• | Press PS. | ||
completed, the radio will play the first station. | |||
The stations will be played for approximately | |||
If desired, stations can also be stored manu- | |||
8 seconds each. | |||
ally on the Travelstore bank (see “Storing | |||
stations”). | The positions blinking in the display show | ||
| you the memory bank and preset position of | ||
Recalling stored stations | the currently scanned station. |
|
The scanned frequency or the station name will start flashing in the display. During the actual scanning process “SCAN” will be displayed.
To select a station currently being scan- ned and switch off the scan function:
•Press SC briefly.
If no station is selected, the scan function will be automatically switched off after the fre- quency band has been run through comple- tely. The unit will tune in the station listened to before starting the scan.
Selecting the seek tuning sensi- tivity
You can alter the automatic seek tuning sensitivity.
If “lo” is displayed, the radio will only pick up
You can recall any stored station at the touch of a button.
•Select the waveband by pressing FMT or M•L. On FM, also choose the corre- sponding memory bank by pressing the FMT button as many times until the desired bank appears in the display.
•Press the corresponding preset button briefly to recall the station.
To select a station currently being scanned and switch off Preset Scan:
•Press PS briefly.
Scanning stations with
Radio-Scan
Beginning with the station currently tuned in, you can scan the waveband. The radio will play each station for 8 seconds.
To start the scan:
•Press SC briefly.
strong, local stations (low sensitivity).
If “lo” does not light up, the radio will also pick up weaker, distant stations (high sensitivity). To switch over,
•Press lo or dx.
On top of this, the sensitivity levels can be adjusted separately for lo and dx (see chap- ter “DSC programming”).
26
