BenQ W6500 Background Color, Menu Display Time 10 sec, Menu Settings, Menu Position Center

Background Color	Allows you to choose the color of the background screen that will be displayed
(Blue)	when there is no input source detected.
	Menu Display Time (10 sec)
	Sets the length of time the OSD will remain active after your last key press. The
Menu Settings	range is from 5 to 30 seconds in 5-second increments.
	Menu Position (Center)
	Sets the On-Screen Display (OSD) menu position.
Input Source	Selects an input source to be projected. See "Selecting an input source" on
	page 21 for details.
Auto Source Search	Sets whether the projector searches automatically for input sources. If the source
	scan is On, the projector will scan for input sources until it acquires a signal. If
(Off)
	the function is not activated, the projector selects the last used input source.

Advanced Setup menu
Function	Description
(Default setting/value)
	Lamp Power (Normal)
	Selects the projector lamp power between Normal and Economic modes.
	Reset Lamp Timer
Lamp Settings	Once the lamp is renewed, select Reset to return the lamp timer to "0". See
	"Resetting the lamp timer" on page 47 for details.
	Equivalent Lamp Hour
	Shows the lamp hour information. See "Getting to know the lamp hour" on
	page 44 for details.
	Selects an input source type for the HDMI signal. Auto is the default and
HDMI Settings	recommended setting. You can also manually select the source type. The
	different source types carry different standards for the brightness level.
(Auto)
	This function is only available when the HDMI signal is selected.
Baud Rate	Selects a baud rate that is identical with your computer’s so that you can connect
	the projector using a suitable RS-232 cable and update or download the
(115200)
	projector’s firmware. This function is intended for qualified service personnel.
	Press ENTER to display the grid test pattern. It helps you adjust the image size
Test Pattern	and focus and check that the projected image is free of distortion.
	The function is only available when the projector detects no input
	signal.
High Altitude Mode	A mode for operation in areas like high altitude or high temperature. See
(Off)	"Operating in a high altitude environment" on page 34 for details.
	Password (Off)
	Limits use of the projector to only those who know the correct password. See
Password	"Utilizing the password function" on page 23 for details.
	Change Password
	You will be asked to enter the current password before changing to a new one.
	See "Utilizing the password function" on page 23 for details.
Key Lock	Locks the keys on the projector and remote control except POWER ON/OFF
	( II ) and EXIT. See "Locking control keys" on page 36 for details.

English

Using the projector 41