BenQ W6500 user manual Display menu, System Setup menu, English

English

3D Comb Filter	See "Setting 3D Comb Filter" on page 32 for details.
(On)
Dynamic Black	Automatically changes the black level of the projected pictures to enhance the
(On)	effect of contrast ratio.

Display menu

Function	Description
(Default setting/value)
Aspect Ratio	There are several options to set the picture’s aspect ratio depending on your
(Anamorphic)	input source. See "Selecting the aspect ratio" on page 32 for details.
Keystone	Corrects any keystoning of the picture. See "Correcting picture distortion" on
(0)	page 25 for details.
	Displays the position adjustment page. To move the projected picture, use the
Position	directional arrow keys. The values shown on the lower position of the page
	change with every key press you made until they reach their maximum or
(0)	minimum.
	This function is only available when the Component 1, Component 2,
	or PC signal is selected.
Overscan Adjustment	Conceals the poor picture quality in the four edges. You can also manually press
(depends on the selected	/ to decide how much to be concealed. Setting 0 means the picture is 100%
	displayed. The greater the value, the more portion of the picture is concealed
input source)
	while the screen remains filled and geometrically accurate.
PIP	Turns the PIP window on or off and makes related adjustments. See "Displaying
	more than one image source simultaneously" on page 35 for details.
	H.Size
	Adjusts the horizontal width of the picture.
PC & Component	Phase
	Adjusts the clock phase to reduce picture distortion.
YPbPr Tuning	Auto
	Adjusts the phase, and frequency automatically
	These functions are only available when the
	Component 1, Component 2, or PC signal is selected.

System Setup menu

		Function	Description
	(Default setting/value)
Language			Sets the language for the On-Screen Display (OSD) menus. See "Using the
(		)	menus" on page 22 for details.
Splash Screen			Allows you to select which logo screen will display during projector start-up. You
(BenQ logo)			can choose BenQ logo screen, Blue screen or Black screen.
Projector Position			The projector can be installed on a ceiling or behind a screen, or with one or
(Floor Front)			more mirrors. See "Choosing a location" on page 12 for details.
Auto Off			Prevents unnecessary projection when no signal is detected for a long time. See
(Disable)			"Setting Auto Off" on page 44 for details.
Sleep Timer			Sets the auto-shutdown timer. The timer can be set to a value between 30
(Disable)			minutes and 3 hours.

40 Using the projector