Storing the strongest stations | Sampling stored stations briefly |
automatically with Travelstore | with Preset Scan |
To continue listening to a sampled sta- tion/switch Radio Scan off:
•Briefly press PS.
You can use the Travelstore memory bank to automatically store the six strongest FM sta- tions sorted on the preset buttons according to their signal strength. This feature is espe- cially useful when travelling, because it will always give you the most powerful stations at a fingertip as you pass through the various reception areas.
•Press TS for at least 2 seconds.
The radio will seek the most powerful FM stations and store them on the “T” memory bank (Travelstore). As soon as this procedu- re has finished, the first station will be played. FM stations can also be stored manually on the Travelstore memory bank (see “Storing stations”).
Recalling stored stations
You can recall any stored station by pressing the corresponding preset button.
•Select FM or TS and with FM also the desired memory bank.
For this purpose, press FM until the desired memory bank is indicated on the display.
•Briefly press the corresponding preset button.
Use the Preset Scan function to briefly sam- ple all stations stored under FM or TS.
•Press FM or TS.
•Press PS,
the set will then sample all the stored stations, with FM on all memory banks.
Free preset buttons will be skipped. To switch off Preset Scan:
•Press PS once again.
The system will continue to play the currently sampled station.
Sampling stations briefly with Radio Scan
Starting with the currently played station, you may let the system sample the following ones one after another.
To activate Scan:
•Press PS for about 2 seconds.
The sampled frequency or the station name starts flashing in the display. During the actual search process, “SCAN” is flashing.
If no station is selected during the search operation, the scan function will be automa- tically switched off after the entire frequency band has been passed through. The radio will then return to the initial station that was being played when the scan function was activated.
For more information, please also refer to chapter “DSC programming - SCANTIME”.
24
