If the power supply to the radio is interrupted while the code system is switched on, you need to know the right code number.
The radio will operate again as soon as you have entered the right code number.
If you lose your radio passport and have forgotten your code number, you will not be able to restart the set after the power supply has been interrupted. In this case, your radio can only be reset in our central customer service workshop or in one of our service agencies abroad.
Switching the code system on
Precondition:
The radio must be connected to permanent power.
In order to switch the code system on:
•Turn the radio off.
•Hold down the preset buttons 1 and 4 simultaneously.
•Turn the radio on.
“CODE” briefly appears before the ra- dio begins to operate.
•Release preset buttons 1 and 4.
The code system is on.
“CODE” will be briefly displayed each time the radio is turned on.
Restart following interruption of power supply
(Code system switched on)
•Switch on the set.
“CODE” will appear in the display.
•Briefly press preset button 1, “0000” will appear in the display.
•Enter the code number given in the Blaupunkt car radio passport: Example: the code number is 2521.
-Press preset button 1 twice, “2000” appears in the display.
-Press preset button 2 five times, “2500” appears in the display.
-Press preset button 3 twice, “2520” appears in the display.
-Press preset button 4 once, “2521” appears in the display.
•To confirm the code number: Press the upper part of the rocker switch 
.
Your car radio is now ready for operation.
If four dashes appear again in the display, you have entered a wrong code number. Now it is essential to enter the correct code after the waiting period has elapsed (CODE in the display).
If the radio is turned off before the waiting | DEUTSCH | |
| ||
period has elapsed, then the waiting period |
| |
restarts as soon as the radio is turned on |
| |
again. | ENGLISH | |
Switching the code system off | ||
|
• Turn off the radio. | FRANÇAIS | |
and 4 and hold them down. | ||
• Simultaneously press preset buttons 1 |
| |
• Turn the set on. |
| |
| ||
| ||
“CODE” will appear in the display. | ITALIANO | |
• Enter the code number given in the | ||
| ||
Blaupunkt car radio passport and con- |
| |
firm: See example “Restart following |
| |
NEDERLAND | ||
interruption …”. | ||
|
The code system is now deactivated.
Optical indication of theft protec-
tion | SVENSKA | |
| ||
When the car is parked, you can let the LED |
| |
warning light flash in order to show that the |
| |
set is |
| |
ESPAGÑOL | ||
DSC allows you to adjust two different set- | ||
| ||
tings: LED ON or LED OFF. |
| |
For more information, please read through |
| |
chapter “DSC programming - LED ON”. |
| |
PORTUGUES | ||
| ||
|
|
21
