CD and CDC operation

Selecting the display mode

You can select the desired display mode for CD operation:

“NAME”

– The specified name, for

 

 

example “MADONNA”

 

 

will be displayed.

“TIME”

The elapsed playback

 

 

time of the title is dis-

 

 

played, for example

 

 

“2 : 32”.

In addition for CDC operation:

“NUMBER” –

The CD position in the

 

 

magazine (disc number)

is displayed, for example “CD 8”.

To switch the display mode:

Press the AF button during CD play- back.

The display mode and the corresponding setting or value will briefly show on the dis- play panel, e.g. “TIME”, “2 : 32”.

If you have selected “NAME” without hav- ing specified a name for the corresponding disc, “CD PLAY” will appear in the display. Please read also the chapter “Entering CD names”.

Storing the display mode

You can store your preferred display mode which will then be active each time the ra- dio is switched on.

If required,

press AF as many times until the de- sired setting is displayed.

Hold down the AF button until you hear a beep.

SCAN operation

Use this function to scan all of the CD tracks. For CDC operation, the system will scan the titles of all discs.

To start the Scan function:

Press SC/MIX for approximately one second.

The titles will be scanned one after the oth- er in ascending order.

To stop the Scan function:

Press SC/MIX once again briefly.

The track currently being scanned is con- tinued to be played.

SCAN will also be terminated by

pressing one of the buttons AUD, GEO, DSC, SRC, TPM, ,

<< >> or /.

TPM Track Program Memory

Use this feature to programme and play your favourite CD titles.

Up to 30 CDs can be managed in the CD mode, up to 99 discs in the CDC mode.

Storing tracks with TPM

Make sure that the TPM function is switched off (“TPM” not shown on the display panel). If you have not yet stored a track in the TPM, the function will be unavailable.

If required,

switch TPM on/off by pressing the TPM button.

Use / to select a track. The track number will be displayed.

Hold down the TPM button until you hear a beep.

Now the track has been stored.

With CDC operation, a “ “ symbol will ap- pear in front of the CD name.

Then select the next track with / and store with TPM, as detailed above.

You can also store a track at any time dur- ing CD playback. For this it is necessary that “TPM” and “SCAN” are deactivated.

Programme TPM information for other CDs in the same way.

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

49

Page 22
Image 22
Blaupunkt RDM 126 Selecting the display mode, Storing the display mode, Scan operation, To stop the Scan function