Blaupunkt RDM 169 US Sampling stations with PTY-SCAN, PTY priority, Storing the program type

If no station broadcasting the selected pro- gram type is found, “NO PTY” appears brief- ly on the display, and the beep sounds. The last station selected is played.

Radio operation with RDS (Radio Data System)

DEUTSCH

b)With the seek run rocker << >>

If PTY is activated, you can select a program type with << >>.

•Press << or >>: the last program type selected is displayed for three seconds.

•During this time, select the desired program type with >> (forwards) or << (back).

•Press << or >> as many times as necessary.

To listen to a station broadcasting this program type:

• Start the seek run with /.

•Hold the desired key (ST1- ST6) down until the beep sounds.

The selected program type can be called up by means of this key when PTY is activated (“PTY” appears on the display).

Sampling stations with PTY-SCAN

Condition: “PTY” must be displayed.

•Press SCA.

The stations with this program type which can be received are sampled briefly.

Deactivating PTY-SCAN:

•Press SCA or the seek rocker again.

Following a frequency seek run, PTY-SCAN is automatically deactivated.

PTY priority

Situation:

Example:

-Previous station: NDR 3.

-“PTY” on the display

-“POP” selected

-Seek run started

-No station with “PTY-POP” found

-Display shows “NO PTY” and

-Switches back to NDR 3 automatically

-NDR 2 is broadcasting “PTY-POP”

-Unit switches within the station chain to NDR 2 and plays it as long as the station continues to broadcast “POP”.

The unit also switches automatically in CD mode to the station broadcasting the selec- ted program type within the transmission chain.

When the PTY program is over, the unit

ENGLISH FRANÇAIS ITALIANO NEDERLANDS

Storing the program type	PTY is activated, the logo appears on the
	display.
A program type is stored on each of the keys
	No station broadcasting the selected pro-
ST1 - ST6 by the factory.	gram type can be received at this time (by
You can however store other available pro-	seek or by Scan).
gram types.	The unit switches back to the previous sta-
“PTY” must be displayed before you can	tion.
store a different program type.	As soon as a station broadcasting the se-
• If necessary, activate “PTY” using the	lected program type can be received within
PTY key.	the station chain, the unit switches to this
• Select the program type with << >>	station in radio mode for the duration of the
	program.
and

switches back to the source previously se- lected (radio or CD).

Note:

As already mentioned, these functions are not currently available with all RDS stations.

SVENSKA ESPAÑOL PORTUGUÊS

21