Turn the controller over so it is lying face down and remove the Wii remote cover from the guitar. Connect the Wii remote connector plug from the guitar to the socket at the base of your Wii Remote.

Insert the Wii Remote into the space provided in the guitar. You may need to adjust the cable so the Wii Remote sits correctly. The controls of the Wii remote should be face down so they are positioned for control from the front of the guitar.

Feed the wrist strap from the Wii Remote into the space provided and then replace the cover and lock it into place.

Switch on the Wii Remote as normal and your guitar is ready to use.

Please note that the Thumb Stick and the Whammy bar should be at their neutral position when the Wii Remote is switched on. If the position was not neutral then this can be reset by disconnecting the guitar from the Wii Remote and then reconnecting while the controls are in their neutral position.

The guitar is now ready to use. Please see the manual for your Music Game to understand the various functions the guitar controls since these will vary from game to game.

3

WARRANTY AND TECHNICAL SUPPORT

Every Blockhead branded product comes with a 90 day warranty (U.S. Only). Blockhead will replace, repair or refund any defective products or components at no charge to you within 90 days of the purchase date. This warranty does not apply if the Blockhead branded product has been damaged by misuse, neglect, or reasons unrelated to defective materials or assembly. Blockhead is not responsible or liable for loss of data or loss of equipment use. You must retain a copy of your original receipt for warranty support.

For support on Blockhead products, contact us by visiting www.blockheadgaming.com or call us at 727-431-0650. For general questions, comments, information or recipes, email us at info@blockheadgaming.com.

FCC INFORMATION

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guara ntee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate equipment.

4

Page 1
Page 2
Image 2
Blockhead Max-V, DUS0263 manual Warranty and Technical Support, FCC Information
Page 1

DUS0263, Max-V specifications

The Blockhead Max-V, designated DUS0263, is an advanced robotics platform designed for various applications, ranging from automation in manufacturing to research and educational purposes. With its cutting-edge design, the Max-V stands out in the robotics landscape thanks to its impressive array of features, technologies, and characteristics.

One of the primary features of the Blockhead Max-V is its modular architecture. This design allows for easy upgrades and customization, enabling users to tailor the robot to meet their specific needs. The modular components can include different sensors, cameras, and manipulators, providing flexibility for diverse applications. This adaptability makes the Max-V equally suitable for complex industrial tasks and educational settings where learning robotics is paramount.

In terms of technology, the Max-V is equipped with state-of-the-art artificial intelligence capabilities. The onboard AI algorithms enable the robot to learn from its environment, adapt to unexpected changes, and improve its performance over time. This machine learning capability is backed by powerful processors that ensure real-time data processing for efficient operations. The integration of AI allows the robot to undertake tasks such as object recognition, obstacle avoidance, and path planning seamlessly.

Another key characteristic of the Blockhead Max-V is its robust connectivity options. The robot supports various wireless communication protocols, including Wi-Fi, Bluetooth, and Zigbee. This feature enables the Max-V to operate in a networked environment, facilitating easy integration with other devices and systems. As a result, users can remotely monitor and control the robot, making it suitable for teleoperation scenarios in hazardous environments or situations requiring distance.

Additionally, the user-friendly interface and comprehensive software development kit (SDK) make programming the Max-V accessible to individuals with varying levels of expertise. Whether for hobbyists or seasoned developers, the SDK provides tools and libraries that simplify the development of custom applications, allowing users to unlock the robot's full potential.

The Blockhead Max-V, DUS0263, is not just a robot; it is a versatile platform that embraces both innovation and practicality. Its combination of modular design, advanced AI capabilities, robust connectivity, and ease of programming make it a powerful tool for businesses and educational institutions alike, paving the way for future developments in the field of robotics.
Top Page Image Contents