
3Installation
BPlease remember that the
manufacturer shall not be held liable if the information given in the instruction manual is not observed.
Points to be considered when
1. Your refrigerator must be |
|
|
| |
emptied and cleaned prior to any |
|
|
| |
transportation. |
|
|
| |
2. Shelves, accessories, crisper and | 3. | Clean the interior of the refrigerator as | ||
etc. in your refrigerator must be | ||||
| recommended in the “Maintenance | |||
fastened securely by adhesive tape |
| |||
| and cleaning” section. | |||
against any jolt before repackaging. |
| |||
4. | Plug the refrigerator into the wall | |||
3. Packaging must be tied with thick | ||||
| outlet. When the fridge door is open | |||
tapes and strong ropes and the |
| |||
| the fridge compartment interior light | |||
rules of transportation printed on the |
| |||
| will come on. | |||
package must be followed. |
| |||
5. | You will hear a noise as the | |||
Please do not forget… | ||||
| compressor starts up. The liquid and | |||
Every recycled material is an |
| |||
| gases sealed within the refrigeration | |||
indispensable source for the nature |
| |||
| system may also give rise to noise, | |||
and for our national resources. |
| |||
| even if the compressor is not running | |||
If you wish to contribute to recycling |
| |||
| and this is quite normal. | |||
the packaging materials, you can |
| |||
6. | Front edges of the refrigerator may | |||
get further information from the | ||||
| feel warm. This is normal. These | |||
environmental bodies or local |
| |||
| areas are designed to be warm to | |||
authorities. |
| |||
| avoid condensation. | |||
Before operating your |
| |||
Electric connection | ||||
refrigerator | ||||
Connect your product to a grounded | ||||
Before starting to use your refrigerator | ||||
socket which is being protected by a | ||||
check the following: | ||||
fuse with the appropriate capacity. | ||||
1. Is the interior of the refrigerator dry | ||||
Important: | ||||
and can the air circulate freely in the | ||||
• | The connection must be in | |||
rear of it? | ||||
| compliance with national regulations. | |||
2. You can install the 2 plastic wedges |
| |||
• | The power cable plug must be easily | |||
as illustrated in the figure. Plastic | ||||
| accessible after installation. | |||
wedges will provide the required |
| |||
• | The specified voltage must be equal | |||
distance between your refrigerator | ||||
| to your mains voltage. | |||
and the wall in order to allow the air |
| |||
• | Extension cables and multiway plugs | |||
circulation. (The illustrated figure is | ||||
| must not be used for connection. | |||
only an example and does not match |
| |||
|
|
|
exactly with your product.)
8
EN