10.Rotate the upper hinge 180 degrees and then unscrew and remove the hinge pin using a pair of pliers and
11.Reposition plugs and hinge pin bushings on top of doors on the opposite side of both doors. Use small
12.Reposition left hand side feet
on the opposite side. Unscrew and reposition the bottom hinge bushing.
(10)
13.Unscrew and remove the upper door middle hinge pin bushing/ door stopper using a
14.
left hand side using
15.Fit upper door left hand side middle hinge pin bushing/door stopper supplied in the plastic bag using cross- headed screwdriver.(13)
16.Reposition three small plastic plugs on the left hand side, which are covering middle hinge holes, on the opposite side to cover holes left empty.(14)
17.Locate and
(15)
18.Locate the middle hinge pin to middle hinge pin bushing of upper door on the left hand side and
19.Reposition the two screws fitted to lower hinge holes on the left hand side at the bottom of the cabinet on the opposite side.(17)
20.Locate and
21.Carefully stand the appliance upright and adjust the two front feet if necessary.
22.Check that doors open and close easily, they are aligned correctly and that there are no gaps allowing air into the cabinet. If there are gaps between the door seal and the cabinet, adjust the door seal by gently pulling away from the door using fingers.
23.Check that all the hinge screws are tightened. Avoid over tightening the screws.
24.Put all items, fittings back in the appliance.
25.Fit upper door top trim and
front top panel plastic hinge covers. Upper door top trim hinge covers are supplied in the plastic bag.(20)
26.Wait for at least 4 hours to allow the system to settle before switching on.
27.Once the correct storage temperatures have been reached in the appliance, put back all the food.
28.Fit the door handle to the opposite side of the door and tighten the bolts.
(24)
11
EN
