Blomberg WMF 8428 A Viscose Fashioncare, Duvet, Economy Symbol, Special programs, Rinse

blended fabrics.

• Viscose (Fashioncare)

You can use this program to wash your laundry that bear “viscous and viscous blends” labels or which are advised to be washed with delicate programs. It cleans your laundry without causing any deformation to them. E.g.: Blouses, dresses, skirts and etc.

• Duvet

You can also wash your machine-washable fiber duvets with this program.

C You must not load more than 1 piece of fiber duvet for two persons.

Economy Symbol

Shows energy saving programs and temperature selections.

As "Intensive" and "Hygiene" programs are long programs with higher temperature selections to ensure hygiene, “Economy” Symbol will not light up.

Special programs

For specific applications, select any of the following programs:

• Rinse

This program is used when you want to rinse or starch separately.

• Spin + Drain

This program spins with maximum possible rpm in the default setting after the water drains from the machine.

C Use a lower spin speed for delicate laundries.

Temperature selection

Whenever a new program is selected, the temperature anticipated for that program appears on the temperature indicator (7b). To change the temperature, press the temperature button. Temperature decreases in 10° increments.

Cold selection is shown with “-” symbol.

	Normally soiled, white cottons and
90˚C	linens. (Ex.: coffee table covers,
	tablecloths, towels, bed sheets)
	Normally soiled, fade proof colored
	linens, cottons or synthetic clothes
60˚C	(Ex.: shirts, nightgowns, pajamas)
	and lightly soiled white linen clothes
	(Ex.: underwear)
40˚C	Blended clothes including
	synthetics and woolens as well as
30˚C Cold
	delicates.

Spin Speed selection

Whenever a new program is selected, the maximum spin speed of the selected program is displayed on the spin speed indicator.

To decrease the spin speed, press the “Spin” button. Spin speed decreases gradually. Then, rinse hold and no spin options are shown

respectively.

Rinse hold is shown with “” and no spin is

shown with “” symbols.

If you are not going to unload your clothes immediately after the cycle, you may use rinse hold function in order to prevent your clothes become wrinkled when there is no water in the machine. With this function, your laundry is kept in the final rinsing water. If you want to spin your laundry after the rinse hold function:

-Adjust the spin speed.

-Press “Start/Pause/Cancel” button. Program resumes. Your machine drains the water and spins your laundry.

You can use no spin function in order to drain the water without spinning at the end of the program.

7 - EN