12 EN
Changing the selections after
programme has started
To change your settings after the program has
started, you have to switch the machine to Pause
mode first.
C Evenifyouselectanewprogrambychanging
thepositionoftheProgrammeSelectionknob
while the machine is running or in Pause mode,
the programme selected first will continue. You
must cancel the current programme to change
the washing programme. See "Canceling the
programme".
Changing the auxiliary function, speed and
temperature
Dependingonthesteptheprogrammehasreached,
you can cancel or activate the auxiliary functions;
see, "Auxiliary function selection".
You can also change the speed and temperature
settings; see, "Spin speed selection" and
"Temperature selection".
Adding or taking out laundry
PressStart/Pause/Cancelbuttontoswitchthe
machinetopausemode.WaituntiltheLoadingDoor
canbeopened.
C IftheLoadingDoorlightdoesnotturn
onin1-2minutes,itmeansthatthewaterlevelin
themachineisnotsuitableandlaundrycannotbe
added.Youcanresumetheprogrammebypressing
Start/Pause/Cancelbutton.OpentheLoading
Doorandaddortakeoutthelaundry.Closethe
LoadingDoor.Makechangesinauxiliaryfunctions,
temperature and speed settings if necessary. Press
Start/Pause/Cancelbuttontostartthemachine.
Canceling the programme
PressandholdStart/Pause/Cancelbuttonfor3
seconds to cancel the current programme. At the
end of this period, machine can drain the water inside
it or can take in and drain water up to 3 times to cool
down the laundry. Washing and End lights turn on.
Oncedrainingiscomplete,Start/Pause/Cancel
andWashinglightsturnoff,andLoadingDoorlight
starts flashing.
WhentheLoadingDoorisopenable,LoadingDoor
lightturnsonandremainslit.Inthiscase,youcan
select and start the new programme.
End of programme
Endlightintheprogrammefollow-upindicatorwill
light up once the programme comes to an end.
PressOn/Offbuttontoswitchoffthemachine.Take
out your laundry and close the loading door. Your
machine is ready for the next washing cycle.
5 Maintenance and cleaning
Servicelifeoftheproductextendsandfrequently
facedproblemsdecreaseifcleanedatregular
intervals.
Cleaning the detergent drawer
Clean the detergent drawer at regular intervals (every
4-5washingcycles)asshownbelowinorderto
prevent accumulation of powder detergent in time.
Press the dotted point on the siphon in the softener
compartment and pull towards you until the
compartment is removed from the machine.
C Ifmorethannormalamountofwaterand
softener mixture starts to gather in the softener
compartment,thesiphonmustbecleaned.
Wash the detergent drawer and the siphon with
plentyoflukewarmwaterinawashbasin.Wear
protectiveglovesoruseanappropriatebrushto
avoid touching of the residues in the drawer with your
skinwhencleaning.Insertthedrawerbackintoits
place after cleaning and make sure that it is seated
well.
Cleaning the water intake filters
There is a filter at the end of each water intake valve
at the rear of the machine and also at the end of
each water intake hose where they are connected to
thetap.Thesefilterspreventforeignsubstancesand
dirt in the water to enter the washing machine. Filters
shouldbecleanedastheydogetdirty.
Close the taps. Remove the nuts of the water intake
hoses to access the filters on the water intake valves.
Cleanthemwithanappropriatebrush.Ifthefiltersare
toodirty,takethemoutbymeansofpliersandclean
them. Take out the filters on the flat ends of the water
intake hoses together with the gaskets and clean
thoroughly under running water. Replace the gaskets
and filters carefully in their places and tighten the
hosenutsbyhand.
Draining remaining water and
cleaning the pump filter
The filter system in your machine prevents solid items
suchasbuttons,coinsandfabricfiberscloggingthe
pump impeller during discharge of washing water.
Thus,thewaterwillbedischargedwithoutany
problemandtheservicelifeofthepumpwillextend.
Ifthemachinefailstodrainwater,thepumpfilter
isclogged.Filtermustbecleanedwheneveritis
cloggedorinevery3months.Watermustbedrained
off first to clean the pump filter.
Inaddition,priortotransportingthemachine(eg.,
when moving to another house) and in case of
freezingofthewater,watermayhavetobedrained