Appropriate installation location

•Place the machine on a rigid floor. Do not place it on a long pile rug or similar surfaces.

•Total weight of the washing machine and the dryer -with full load- when they are placed on top of each other reaches to approx. 180 kilograms. Place the product on a solid and flat floor that has sufficient load carrying capacity!

•Do not place the product on the power cable.

•Do not install the product at places where temperature may fall below 0ºC.

•Place the product at least 1 cm away from the edges of other furniture.

Removing packaging reinforcement

Tilt the machine backwards to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon.

Removing the transportation locks

A Do not remove the transportation locks before taking out the packaging reinforcement.

A Remove the transportation safety bolts before operating the washing machine, otherwise, the product will be damaged.

1.Loosen all the bolts with a spanner until they rotate freely (C).

2.Remove transportation safety bolts by turning them gently.

3.Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel.

(P)

C Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future.

C Never move the product without the transportation safety bolts properly fixed in place!

Connecting water supply

C The water supply pressure required to run the product is between 1 to 10 bars (0.1 – 10 MPa). It is necessary to have 10 – 80 liters of water flowing from the fully open tap in one minute to have your machine run smoothly. Attach a pressure reducing valve if water pressure is higher.

C If you are going to use the double water-inlet product as a single (cold) water-inlet unit, you must install the supplied stopper to the hot water valve before operating the product. (Applies for the products supplied with a blind stopper group.)

C If you want to use both water inlets of the product, connect the hot water hose after removing the stopper and gasket group from the hot water valve. (Applies for the products supplied with a blind stopper group.)

A Models with a single water inlet should not be connected to the hot water tap. In such a case the laundry will get damaged or the product

will switch to protection mode and will not operate.

A Do not use old or used water inlet hoses on the new product. It may cause stains on your laundry.

1.Connect the special hoses supplied with the product to the water inlets on the product. Red hose (left) (max. 90 ºC) is for hot water inlet, blue hose (right) (max. 25 ºC) is for cold water inlet.

A Ensure that the cold and hot water connections are made correctly when installing the product. Otherwise, your laundry will come out hot at the end of the washing process and wear out.

2.Tighten all hose nuts by hand. Never use a wrench when tightening the nuts.

3.Open the taps completely after making the hose connection to check for water leaks at the connection points. If any leaks occur, turn off the tap and remove the nut. Retighten the nut carefully after checking the seal. To prevent water leakages and damages caused by them, keep the taps closed when the machine is not in use.

Connecting to the drain

•The end of the drain hose must be directly

connected to the wastewater drain or to the washbasin.

A Your house will be flooded if the hose comes out of its housing during water discharge. Moreover, there is risk of scalding due to high washing temperatures! To prevent such situations and to ensure smooth water intake and discharge of the machine, fix the end of the discharge hose tightly so that it cannot come out.

•The hose should be attached to a height of at least 40 cm, and 100 cm at most.

•In case the hose is elevated after laying it on the floor level or close to the ground (less than

40 cm above the ground), water discharge becomes more difficult and the laundry may

WNF 6461 AE20, WNF 6401 WE20, WNF 6441 AE20 specifications

Blomberg is renowned for its commitment to quality and innovation in the realm of home appliances, and the WNF 6441 AE20, WNF 6401 WE20, and WNF 6461 AE20 washing machines showcase this dedication perfectly. Each model comes with unique features that cater to different laundry needs, making them suitable for a variety of households.

The Blomberg WNF 6441 AE20 is a front-loading washing machine that is designed to offer efficiency along with a range of advanced features. One of its prominent characteristics is its A+++ energy rating, which ensures lower energy consumption without compromising on performance. The device is equipped with an intuitive control panel and a variety of washing programs, including quick wash and eco modes, allowing users to choose the best cycle for their laundry. Additionally, this model incorporates a specialized anti-allergy program that helps remove allergens, making it ideal for households with sensitive skin.

Moving on to the WNF 6401 WE20, this model is tailored for users seeking simplicity without sacrificing quality. It maintains a commendable energy rating and hosts multiple wash cycles suitable for different fabric types. One standout feature is its Large Capacity Drum, which provides enough space for larger loads, reducing the number of cycles needed. Furthermore, it includes a child lock for safety, ensuring peace of mind for families. The compact design also makes it an excellent option for homes with limited space.

The WNF 6461 AE20, meanwhile, combines advanced technology with stylish design. This model features a digital display that offers clear visibility of wash settings and remaining time. The ProSmart Inverter Motor, known for its quiet operation and durability, enhances the user experience by minimizing noise levels during washes. Additionally, the machine boasts a self-cleaning detergent drawer, which helps to maintain hygiene and performance over time. Its diverse selection of washing programs provides solutions for everything from delicates to heavily soiled items, making it versatile for various laundry needs.

All three models incorporate Blomberg's commitment to sustainability, employing advanced technology to reduce water and energy usage. Moreover, they are designed for user-friendliness, featuring ergonomic doors and easy-to-navigate controls. The build quality and efficiency of the WNF 6441 AE20, WNF 6401 WE20, and WNF 6461 AE20 position them as excellent choices for consumers looking for reliable and effective washing solutions that cater to both everyday and special laundry needs.

Blomberg WNF 6441 AE20 Appropriate installation location, Removing packaging reinforcement

Models: WNF 6461 AE20 WNF 6401 WE20 WNF 6441 AE20