7 Troubleshooting

Programme cannot be started or selected.

•Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> Press and hold Start / Pause button for 3 seconds to reset the machine to factory settings. (See "Canceling the programme")

Water in the machine.

•Some water might have remained in the product due to the quality control processes in the production. >>> This is not a failure; water is not harmful to the machine.

Machine vibrates or makes noise.

•Machine might be standing unbalanced. >>> Adjust the feet to level the machine.

•A hard substance might have entered into the pump filter. >>> Clean the pump filter.

•Transportation safety bolts are not removed. >>> Remove the transportation safety bolts.

•Laundry quantity in the machine might be too little. >>> Add more laundry to the machine.

•Machine might be overloaded with laundry. >>> Take out some of the laundry from the machine or distribute the load by hand to balance it homogenously in the machine.

•Machine might be leaning on a rigid item. >>> Make sure that the machine is not leaning on anything.

Machine stopped shortly after the programme started.

•Machine might have stopped temporarily due to low voltage. >>> It will resume running when the voltage restores to the normal level.

Programme time does not countdown. (On models with display)

•Timer may stop during water intake. >>> Timer indicator will not countdown until the machine takes in adequate amount of water. The machine will wait until there is sufficient amount of water to avoid poor washing results due to lack of water. Timer indicator will resume countdown after this.

•Timer may stop during heating step. >>> Timer indicator will not countdown until the machine reaches the selected temperature.

•Timer may stop during spinning step. >>> Automatic unbalanced load detection system might be

activated due to the unbalanced distribution of the laundry in the drum.

C Machine does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.

Foam is overflowing from the detergent drawer.

•Too much detergent is used. >>> Mix 1 tablespoonful softener and ½ l water and pour into the

main wash compartment of the detergent drawer.

C Put detergent into the machine suitable for the programmes and maximum loads indicated in the “Programme and consumption table”. When you use additional chemicals (stain removers, bleachs and etc), reduce the amount of detergent.

Laundry remains wet at the end of the programme

•Excessive foam might have occurred and automatic foam absorption system might have been

activated due to too much detergent usage. >>> Use recommended amount of detergent. C Machine does not switch to spinning step when the laundry is not evenly distributed in the drum

to prevent any damage to the machine and to its surrounding environment. Laundry should be rearranged and re-spun.

A If you cannot eliminate the problem although you follow the instructions in this section, consult your dealer or the Authorized Service Agent. Never try to repair a nonfunctional product yourself.

2820522169_EN/120911.1721

18

EN

Page 17 Page 19
Page 18
Image 18
Blomberg WNF 6441 AE20, WNF 6401 WE20, WNF 6461 AE20 user manual Troubleshooting
Page 17 Page 19

WNF 6461 AE20, WNF 6401 WE20, WNF 6441 AE20 specifications

Blomberg is renowned for its commitment to quality and innovation in the realm of home appliances, and the WNF 6441 AE20, WNF 6401 WE20, and WNF 6461 AE20 washing machines showcase this dedication perfectly. Each model comes with unique features that cater to different laundry needs, making them suitable for a variety of households.

The Blomberg WNF 6441 AE20 is a front-loading washing machine that is designed to offer efficiency along with a range of advanced features. One of its prominent characteristics is its A+++ energy rating, which ensures lower energy consumption without compromising on performance. The device is equipped with an intuitive control panel and a variety of washing programs, including quick wash and eco modes, allowing users to choose the best cycle for their laundry. Additionally, this model incorporates a specialized anti-allergy program that helps remove allergens, making it ideal for households with sensitive skin.

Moving on to the WNF 6401 WE20, this model is tailored for users seeking simplicity without sacrificing quality. It maintains a commendable energy rating and hosts multiple wash cycles suitable for different fabric types. One standout feature is its Large Capacity Drum, which provides enough space for larger loads, reducing the number of cycles needed. Furthermore, it includes a child lock for safety, ensuring peace of mind for families. The compact design also makes it an excellent option for homes with limited space.

The WNF 6461 AE20, meanwhile, combines advanced technology with stylish design. This model features a digital display that offers clear visibility of wash settings and remaining time. The ProSmart Inverter Motor, known for its quiet operation and durability, enhances the user experience by minimizing noise levels during washes. Additionally, the machine boasts a self-cleaning detergent drawer, which helps to maintain hygiene and performance over time. Its diverse selection of washing programs provides solutions for everything from delicates to heavily soiled items, making it versatile for various laundry needs.

All three models incorporate Blomberg's commitment to sustainability, employing advanced technology to reduce water and energy usage. Moreover, they are designed for user-friendliness, featuring ergonomic doors and easy-to-navigate controls. The build quality and efficiency of the WNF 6441 AE20, WNF 6401 WE20, and WNF 6461 AE20 position them as excellent choices for consumers looking for reliable and effective washing solutions that cater to both everyday and special laundry needs.
Top Page Image Contents