• Rinse
This program is used when you want to rinse or starch separately.
• Spin + Drain
This program spins with maximum possible rpm in the default setting after the water drains from the machine.
C Use a lower spin speed for delicate laundries.
Temperature selection
Whenever a new program is selected, the temperature anticipated for that program appears on the temperature indicator (7b). To change the temperature, press the temperature button. Temperature decreases in 10° increments.
Cold selection is shown with
| Normally soiled, white cottons and | |
90˚C | linens. (Ex.: coffee table covers, | |
| tablecloths, towels, bed sheets) | |
| Normally soiled, fade proof colored | |
| linens, cottons or synthetic clothes | |
60˚C | (Ex.: shirts, nightgowns, pajamas) | |
| and lightly soiled white linen clothes | |
| (Ex.: underwear) | |
40˚C | Blended clothes including | |
synthetics and woolens as well as | ||
30˚C Cold | ||
delicates. | ||
|
Spin Speed selection
Whenever a new program is selected, the maximum spin speed of the selected program is displayed on the spin speed indicator.
To decrease the spin speed, press the “Spin” button. Spin speed decreases gradually. Then, rinse hold and no spin options are shown respectively.
Rinse hold is shown with “
” and no spin is
shown with “
” symbols.
If you are not going to unload your clothes immediately after the cycle, you may use rinse hold function in order to prevent your clothes become wrinkled when there is no water in the machine. With this function, your laundry is kept in the final rinsing water. If you want to spin your laundry after the rinse hold function:
-Adjust the spin speed.
-Press “Start/Pause/Cancel” button. Program resumes. Your machine drains the water and spins your laundry.
You can use no spin function in order to drain the water without spinning at the end of the program.
7 - EN
