OPERATION (continued)

12.View Filter Statistics: To view filter statistics, turn the brewer off. Press and hold the 1st key (Brew), and depress the 3rd (ON/OFF) key. Total water volume will be displayed (TotalVol.). Press the 3rd key to view the Filter Life (FltrLife:). Press the 3rd key to view the percentage of the filter that has been used. (If the filter option is used, the filter life volume needs to be entered in the program – see E-Max™ Programming Manual, Service & Counters Menu.)

13.Diagnostic Messages – Programmed Safety Features: When the E-Max senses a problem, it will automatically turn off all elements and valves, flash lights, display the message

“Call For Service” and display one of the messages below. (Additionally: a service phone number may appear if it has been programmed into the system.)

*To reset the brewer it can be re-energized (or press and hold CANCEL for 3 seconds for all faults except the Valve Fault, which must be reset by re-energizing). The brewer will try to re-start, but if the same problem persists, the appropriate error message will appear again. Consult the Trouble Shooting section to determine how to solve the problem.

A.“Probe/Heater Error”: Overheating Detection (1): If the heating element is on for 5 minutes and the temperature does not change by +2°F (1°C) in the five minute period, the unit will go into the Over Temperature Mode with all lights flashing. When in this mode the brewer turns off the heating elements, the solenoid valves are turned off; the switches disabled; (and all lights flashing continuously). The LCD display will read “Probe/Heater Error”, followed by the message “Call for Service”, and then the service phone number (if it has been entered into memory). To reset press and hold CANCEL for 3 seconds, or re-energize the brewer. (Possible causes of problem: high limit needs to be re-set; defective high limit, element, triac, water level probe or control board.)

B.“Overheat Error”: Overheating Detection (2): If the E-Max™ senses a temperature over the Maximum Temperature set in the program (factory set at 208ºF or 98ºC) it will go into the over temperature mode as above with all lights flashing, except the LCD will read “overheat error”, and “Call for Service”. To reset press and hold CANCEL for 3 seconds, or re-energize the brewer. (Possible cause of problem is a defective triac, temperature probe or related wiring and connections.)

C.“No Water Sensed” — Time-Out—Inlet Valve: When filling for the first time, the inlet valve will remain open for 4¼ minutes, (the screen will read “filling…”). If water is not detected at the end of this time the E-Max will shut down with the message “no water sensed”. The valves and all elements are turned off, and the Brew and Power light flash alternately with the Heat light, until the brewer is reset. To reset press and hold CANCEL for 3 seconds, or re-energize the brewer. (Possible causes of the problem are: no incoming water; slow flow of incoming water (i.e. less than 45 oz/minute); sensor not reading (check for placement, connections or lime scale).

D.“No Water Sensed” — Time-Out – Brew Valve: During the brew the inlet solenoid valve cycles on intermittently to maintain the proper level in the tank. If the valve is open for

60 seconds without water being detected at the proper level, the brewer will go into the same error mode as above (“no water sensed”). To reset press and hold CANCEL for 3 seconds, or re-energize the brewer. (Possible causes of the problem are: no incoming water; slow flow of incoming water, sensor not reading, etc.).

E.Keyswitch Locked: If a key switch is depressed for 10 seconds this error message will occur. Lights will flash alternately and the brewer will turn off all valves and elements. Press and hold the CANCEL key for 3 seconds to reset the brewer (or re-energize the brewer). If the problem re-occurs this indicates a defective switch on the key pad.

F.“Valve Fault”- Faulty Valve Detection: When an electric or switching problem is detected with either the inlet or brew valve the brewer turns off all elements and valves and displays “valve fault…”. All of the lights will be turned on. Before re-setting the brewer the valves must be checked to determine the problem. The brewer must be re-energized to re-set, (pressing CANCEL for 3 seconds will not reset a valve fault).

10

Page 11 Page 13
Page 12
Image 12
Bloomfield 2088EX, 2086EX, 2080, 2082 owner manual Operation
Page 11 Page 13

2082, 2080, 2086EX, 2086, 2088 specifications

Bloomfield has established itself as a leader in the world of high-performance computers with its innovative series of models including the 2086, 2088, 2088EX, 2080, and 2086EX. Each of these models comes packed with unique features, technologies, and characteristics that cater to a wide range of users from casual enthusiasts to professional power users.

The Bloomfield 2086 model is known for its powerful processing capabilities, featuring a multi-core architecture that enhances multitasking performance. It is equipped with cutting-edge thermal management technology, ensuring optimal performance even under heavy workloads. Users appreciate the 2086 for its energy efficiency, which is vital for keeping operational costs down in data-intensive environments.

The Bloomfield 2088 takes performance a step further, delivering enhanced graphics capabilities thanks to its advanced GPU integration. This model is ideal for professionals in creative fields, providing the graphical prowess necessary for tasks such as video editing and 3D rendering. The 2088 also includes superior connectivity options, facilitating seamless integration with various peripherals.

For those who demand even more, the Bloomfield 2088EX stands out with its extreme performance specifications. This version is designed for high-end gaming and complex computing tasks. It boasts an expanded memory capacity and faster data transfer speeds, allowing for lightning-quick response times. Built for reliability, the 2088EX features rugged construction, making it suitable for both office setups and mobile workstations.

The Bloomfield 2080 model is tailored for versatility, offering a balanced blend of power and efficiency. It's a popular choice for users who need a reliable machine for everyday tasks and moderate gaming. This model supports a wide range of software applications, ensuring compatibility with various operating systems and user needs.

Finally, the Bloomfield 2086EX combines the best features of its predecessors while introducing innovative technology elements such as AI-driven performance optimization. This model is designed for those who rely heavily on data analysis and machine learning applications. With its advanced cooling system, the 2086EX stays cool under pressure, ensuring consistent performance during intensive computational tasks.

In summary, the Bloomfield series—comprising the 2086, 2088, 2088EX, 2080, and 2086EX—offers a diverse lineup that meets the needs of different users. With robust performance, adaptability, and state-of-the-art technology, Bloomfield continues to set the standard in high-performance computing.
Top Page Image Contents