CLEANING INSTRUCTIONS
DANGER |
ELECTRIC SHOCK HAZARD |
DO NOT SPRAY WATER ON OR AROUND |
ELECTRICAL EQUIPMENT |
DO NOT WASH FLOOR NEAR ELECTRICAL |
EQUIPMENT WITH WATER SPRAY |
CAUTION:
CUT HAZARD
Use due care when cleaning near fan. Blades are sharp.
CAUTION:
ELECTRIC
SHOCK HAZARD
DO NOT splash or pour water onto control panel or wiring.
CAUTION:
HEAT AND
SMOKE HAZARD
Keep the ventilator fan running during any "hot surface" cleaning operation to avoid a
IMPORTANT: Avoid Fire Suppression System discharge!
Keep the ventilator fan running during any "hot surface" cleaning operation to avoid melting a fusible link and causing a discharge of the fire suppression media.
IMPORTANT:
Always rub / wipe in the direction of the polish lines or grain of the metal.
CONVECTION OVEN CLEANING INSTRUCTIONS
PRECAUTIONS | Turn oven power switch to FAN |
| Allow oven to cool |
FREQUENCY | As Noted |
TOOLS | Mild Detergent, Soft Cloth or Sponge |
| Plastic Scouring Pad |
| Spray Bottle |
DAILY | Commercial Oven Cleaner/Degreaser |
|
1.Turn oven power switch to FAN; remove racks and take to back sink.
2.Let oven cool to 200°F. If oven is cooler than 200°F, raise temperature to no more than 200°F.
3.Mix oven cleaner/degreaser per manufacturer’s directions. Spray oven cleaner/degreaser solution onto soiled surfaces; then, close oven door and let stand for 5 min.
4.Open door slowly to allow steam to escape and allow oven to cool completely.
5.Wipe oven surfaces with a soft cloth, rinse cloth as necessary.
6.
7.Rinse all surfaces with a clean soft cloth dampened with clean water.
8.Wash, rinse, and sanitize oven racks and replace in oven.
9.Wipe exterior surfaces with a clean cloth dampened with clean water and a
HEAVY SOIL RECOVERY—As Needed
1.Turn oven power switch to FAN; remove racks and take to back sink.
2.Let oven cool to 200°F. If oven is cooler than 200°F, raise temperature to no more that 200°F.
3.Spray Oven Cleaner/Degreaser full strength onto soiled surfaces; then, close oven door and let stand for 5 min.
4.Open door slowly to allow steam to escape and allow oven to cool completely.
5.Wipe oven surfaces with a soft cloth, rinse cloth as necessary.
6.
7.Rinse all surfaces with a clean soft cloth dampened with clean water.
8.Wash, rinse, and sanitize oven racks and replace in oven.
509 305936 OpM
18