Bloomfield WVOC-G136 Ventilator Monthly Cleaning, FREQUENCY Monthly, Exterior, Hot Surface

CLEANING INSTRUCTIONS (continued)

509 305936 OpM WVOC-G136

VENTILATOR MONTHLY CLEANING

PREPARATION: Disconnect appliance from electric power Allow to cool before cleaning

FREQUENCY: Monthly

TOOLS: Warm water and a mild detergent Soft clean cloth or sponge

Plastic scouring pad, plastic scraper Container for disposal of grease

EXTERIOR

1.Wash exterior surfaces with a soft clean cloth or sponge dampened with warm water, mild soap or detergent.

2. Rinse with a soft clean cloth or sponge dampened with warm water. Allow to air dry.

INTERIOR:

3.In addition to the weekly cleaning procedure, remove the filter pack.

4.Cover the griddle section.

5.Wash the interior surfaces of the ventilator with warm water, mild soap or detergent and a clean, soft cloth or sponge. Stubborn or burned-on food debris bay be removed with a plastic scouring pad or plastic scraper.

6.Dry thoroughly with a clean soft cloth.

7.Uncover the griddle and reassemble the ventilator.

Procedure is complete.

CAUTION:

ELECTRIC

SHOCK HAZARD

Disconnect appliance from electric power before cleaning.

CAUTION:

HOT SURFACE

Exposed surfaces can be hot to the touch and may cause burns. Allow appliance to cool before cleaning.

IMPORTANT:

Never allow PRE-FILTER or FILTER PACK to get wet. DO NOT wash either of these two filters. Washing these filters will ruin them and cause the appliance to shut-down.

IMPORTANT:

DO NOT spill or pour water into controls, control panel, wiring or coil-type hotplate elements. Damage to internal components will occur. Damage to internal components from water damage is not covered by warranty.

IMPORTANT:

DO NOT use steel wool or metal implements to clean cabinet surfaces.

21