F/N 71537 Oct 07 © 2007 ICS, Blount Inc.
TITLE613GC SERVICE MANUAL
27
8. STARTER
8.18 Assemble components
A Make sure the spring is in the correct
position.
B Use blue Loctite® on the pawl screws.
C Torqueto60in-lbs.(6.8Nm).
8.19 Wind the pawl spring.
A Use needle nose pliers to move the
tail of the spring into position.
8.20 Install starter cover.
A Pull out cord 4-6”.
B Slowly release while placing cover to
allow pawls to engage.