Blount 613GC 9 This section covers the removal, inspection, and assembly of the WallWalker and guard flap.

F/N 71537 Oct 07 © 2007 ICS, Blount Inc.
TITLE613GC SERVICE MANUAL
29
9. WALLWALKER
9 This section covers the removal,
inspection, and assembly of the
WallWalker ® and guard flap.
9.1 Inspect WallWalker® tip.
A If the tip is worn, as shown, replace.
9.2 Remove crankcase screws and wave
washers.
9.3 Remove WallWalker® from saw.
NOTE: On late model saws it is
necessary to remove the bar
plate prior to removing the
crankcase screws.
9.4 Remove guard flap screws and
was her.
9.5 Remove and inspect guard flap.
A Replace the flap if it is torn or
damaged in any way.