OPERATION

633GC OPERATOR’S MANUAL

 

 

PRE-CUT CHECKLIST

•Proper Chain Installation: The bumper should lead the segment into the cut, double bumper chains may be mounted in either direction.

•Proper Chain Tension: The chain should be tight but easily pulled around the guide bar by hand.

•Ensure all safety devices are properly mounted and functional and that all controls are in proper working order.

•Be sure there are no obstructions (plumbing, electrical conduit, air ducts) and no unnecessary people present.

•Always wear protective clothing, including hard hat, eye protection, hearing protection, non-slip safety boots, and gloves. Avoid wearing loose fitting clothing.

•Adequate Water Supply and Pressure: Minimum Flow: 2 gpm (8 lpm)

Minimum Water Pressure: 20 psi (1.4 bar)

•Diamond chains with SealPro® require a minimum water pressure of 20 psi (1.4 bar).

IMPORTANT

PLANNING THE CUT

The single most important factor an operator can control to increase chain life is to use adequate water pressure. Insufficient water supply will result in excessive wear to the chain, which can lead to loss of strength and chain breakage.

•Select the proper chain type for the material being cut.

•Outline the cut with a permanent marker for a visual cutting guide.

•Avoid pinching the guide bar and chain. Always cut the bottom of an opening first, then top, and then the sides. Save the easiest cut for last.

•For the straightest cuts use the “Step Cut” method. First score the entire cut line approximately a half-inch deep using the nose of the bar. Next, deepen the cut by about two inches. Then plunge all the way through and complete the cut using the Wallwalker®.

•Be sure cut concrete cannot fall and injure operator or bystanders. Concrete is very heavy, one cubic foot = 12”x12”x12” = 150 lbs. (30cm x 30cm x 30cm = 68kg).

•Check for live electrical wiring near the cutting area or in the concrete to avoid electrocution.

14

© 2007 ICS, Blount Inc.

P/N 70944 Jan 07

Page 13 Page 15
Page 14
Image 14
Blount 633GC manual PRE-CUT Checklist, Planning the CUT
Page 13 Page 15

633GC specifications

The Blount 633GC is a robust and versatile piece of equipment designed for various industrial applications, particularly in construction and landscaping. It stands out due to its combination of advanced technologies, durability, and user-friendly features.

One of the standout features of the 633GC is its powerful engine. The unit is equipped with an efficient and high-performance engine that not only provides ample power for demanding tasks but also meets stringent emission standards. This balance of power and eco-friendliness makes the 633GC a reliable choice for modern job sites where environmental considerations are paramount.

The machine also boasts a state-of-the-art hydraulic system. This system ensures smooth and precise operation, allowing for enhanced control during lifting and digging tasks. The hydraulic components are designed for durability, reducing maintenance needs and increasing uptime, which is crucial for keeping projects on schedule.

Operator comfort and safety are prioritized in the design of the 633GC. The spacious cab features ergonomic controls and adjustable seating, making it easy for operators to stay comfortable even during long hours of work. Additionally, the cab is equipped with excellent visibility options, enabling operators to maintain awareness of their surroundings and enhance overall job site safety.

The chassis of the 633GC is built to last, featuring high-strength materials that can withstand the rigors of tough job sites. Its design provides excellent stability, making it suitable for operations on uneven terrain. Coupled with a well-designed tracking system, the 633GC ensures reliable gripping and maneuverability, whether on muddy job sites or steep inclines.

Technologically, the Blount 633GC incorporates advanced monitoring systems. These systems allow operators to track machine performance and maintenance needs in real-time, optimizing the operational lifespan of the equipment. The integration of smart technology provides actionable insights that can help prolong equipment life and reduce unexpected breakdowns.

In summary, the Blount 633GC is a powerful and reliable machine that combines advanced technology, operator comfort, and heavy-duty construction. It is ideal for those seeking a versatile solution for a variety of construction and landscaping tasks. With its robust features and commitment to efficiency, the 633GC remains a top contender in the market for industrial machinery.
Top Page Image Contents