633GC OPERATOR’S MANUAL

MAINTENANCE

CARBURETOR

•The function of the carburetor is to mix fuel with air. Adjustments other than idle speed should be made by a servicing dealer.

• Before adjusting the engine idle speed, make sure the air filter is clean and the engine is warmed up.

T – Idle Screw is adjusted so that the engine idles smoothly but the clutch does not engage.

• If saw has been running satisfactorily and there is a

Carburetor idle screw

gradual decrease in power and drop in RPM at full throttle,

 

the filter may have become dirty or saturated with water.

 

GUIDE BARS

•The bar is designed to be used on both sides. If the cut is consistently leading to one side, turn the bar over to expose a new set of rails.

•A table mounted belt or disc sander can be used to square the rails of a worn bar. A badly worn bar can quickly damage an expensive chain. If the chain is touching the bottom of the bar groove, replace the bar.

•Check the guide bar for straightness. Minor adjustments can be made by bending the bar slightly.

•Proper chain tension will extend bar life. See page 9.

•Under some circumstances, especially low water pressure, the sprocket nose can wear out before the guide bar body. Sprocket nose replacement kits may be purchased from an Authorized Dealer (part #70249).

•Spray the chain and bar with lightweight oil for storage.

•Store bar with the sprocket nose up.

•Periodically clean the water ports inside the groove of the bar using a small diameter piece of wire. Water port cleaners are available from an Authorized Dealer.

•The bar is solely a guide track for the chain. Never use the bar to lift, twist or pry concrete material.

P/N 70944 Jan 07

© 2007 ICS, Blount Inc.

23

Page 22 Page 24
Page 23
Image 23
Blount 633GC manual Carburetor, Guide Bars
Page 22 Page 24

633GC specifications

The Blount 633GC is a robust and versatile piece of equipment designed for various industrial applications, particularly in construction and landscaping. It stands out due to its combination of advanced technologies, durability, and user-friendly features.

One of the standout features of the 633GC is its powerful engine. The unit is equipped with an efficient and high-performance engine that not only provides ample power for demanding tasks but also meets stringent emission standards. This balance of power and eco-friendliness makes the 633GC a reliable choice for modern job sites where environmental considerations are paramount.

The machine also boasts a state-of-the-art hydraulic system. This system ensures smooth and precise operation, allowing for enhanced control during lifting and digging tasks. The hydraulic components are designed for durability, reducing maintenance needs and increasing uptime, which is crucial for keeping projects on schedule.

Operator comfort and safety are prioritized in the design of the 633GC. The spacious cab features ergonomic controls and adjustable seating, making it easy for operators to stay comfortable even during long hours of work. Additionally, the cab is equipped with excellent visibility options, enabling operators to maintain awareness of their surroundings and enhance overall job site safety.

The chassis of the 633GC is built to last, featuring high-strength materials that can withstand the rigors of tough job sites. Its design provides excellent stability, making it suitable for operations on uneven terrain. Coupled with a well-designed tracking system, the 633GC ensures reliable gripping and maneuverability, whether on muddy job sites or steep inclines.

Technologically, the Blount 633GC incorporates advanced monitoring systems. These systems allow operators to track machine performance and maintenance needs in real-time, optimizing the operational lifespan of the equipment. The integration of smart technology provides actionable insights that can help prolong equipment life and reduce unexpected breakdowns.

In summary, the Blount 633GC is a powerful and reliable machine that combines advanced technology, operator comfort, and heavy-duty construction. It is ideal for those seeking a versatile solution for a variety of construction and landscaping tasks. With its robust features and commitment to efficiency, the 633GC remains a top contender in the market for industrial machinery.
Top Page Image Contents