Blount manual Symbols & Labels 853PRO OPERATOR’S Manual

SYMBOLS & LABELS 853PRO OPERATOR’S MANUAL

THE FOLLOWING SYMBOLS AND DEFINITIONS ARE FOUND THROUGHOUT THIS MANUAL

AND ARE DESIGNED TO MAKE YOU AWARE OF POTENTIAL HAZARDS OR UNSAFE

PRACTICES.

WARNING

CAUTION

IMPORTANT

A potentially hazardous situation exists which, if not avoided, could result in death or serious injury.

A potentially hazardous situation exists which, if not avoided, may result in minor or moderate injury or property damage.

A potential situation exists which, if not avoided, may result in product or property damage.

THE FOLLOWING SYMBOLS & LABELS MAY BE FOUND IN THIS MANUAL OR ON THE SAW

Read the operator’s manual carefully and understand the contents before you use this equipment.

Always use:

• Protective helmet

• Ear protection

• Protective glasses or full face protection

Wear hand protection

�WARNING

•Do not exceed the hydraulic flow recommended for your saw model: 8 gpm, (30 lpm) or 12 gpm (45 lpm) at 2,500 psi (172.5 bar) hydraulic pressure

•Minimum water pressure 20 psi (1.5 bar)

•Weight 23 lbs (10.4 kg) w/out bar and chain

•Inserting the tool into a pre-cut slot that is narrower than the chain may cause binding and rapid push-back of the tool toward the operator

•Always operate tool with solid footing and firm hand grip

•Contact at a hydraulic leak or burst can cause oil injection into the body

READ OPERATIONS & MAINTENANCE MANUAL BEFORE USE OF TOOL. FAILURE TO OBSERVE THESE PRECAUTIONS CAN RESULT IN SERIOUS PERSONAL INJURY

4 © 2008 ICS, Blount International Inc. Specifications are subject to change without notice. REV0708 F/N 71904