Contact 1-800-762-1142 for assistance.

®

Do not return to place of purchase.

 

 

 

 

 

Assembly Instructions

General Components & Features

Familiarize yourself with all components before proceeding. Refer to page 5 for hardware and components, and page 20 for specifications.

Do NOT attempt assembly unless all components are available. If you believe a component is missing or damaged, contact 1-800-762-1142 for assistance.

Note: All hardware is mounted on a cardboard pack and numbered to match their assembly step.

Additional Requirements

The following items are not included, but are necessary for the proper assembly of your heater. Do NOT attempt to assemble without proper tools. A hex (Allen) wrench is necessary and is included in the parts bag.

(1) 7/16” Wrench

(1) 7/16” Socket Wrench

(1) #2 Phillips Head Screwdriver

(1) Leak Detection Solution (Instructions to prepare are included in step 13)

(1)Precision Filled LP Gas Grill Cylinder with Acme Type 1 external threaded valve connection (4-5 gallon size) Note: You must follow all steps to properly assemble heater.

Step 1 – Attach Legs to Base

Note: Attach Leg with notches for hinges as shown at left.

Secure each leg to base using (2) Large Bolts, (2) Lock Washers and (2)

Large Nuts per leg. Finger tighten only.

Do not fully tighten until Step 2.

Owner’s manual: model 153100 outdoor patio heater

2/13/04

6