Contact 1-800-762-1142 for assistance.

Do not return to place of purchase.

Step 2 – Attach Platform to Legs

• Line up hole in Clip with small threaded hole on bottom of Platform.

• Attach Clip loosely to Platform with (1) Large Screw. Note: Do not tighten until step 10.

•Using 7/16” wrench, secure Platform to Legs using (2) Bolts, (2) Small Lock Washers and (2) Small Nuts per Leg. Tighten fully.

• Fully tighten all nuts and bolts from Step 1.

TIP:

To tighten use a 7/16” wrench on Bolt and a 7/16” socket wrench on Nut.

Step 3 – Attach Weight Plate to Base

•Lay Base Assembly on its side.

•Line up slots at outside edge of Weight Plate with hooks on Wheel Bracket.

• Place Weight Plate in Base, feet out.

•Insert Carriage Bolt through center holes of Base and Plate.

•Using 9/16” wrench, secure Plate to Base using a (1) Large Lock Washer and (1) Large Nut.

•Place Base Assembly upright.

7

Owner’s manual and assembly instructions: model 233000 outdoor patio heater

1/15/03