Outdoor LP Gas Barbecue Grill Model No. 253402

Assembly Instructions

DO NOT RETURN PRODUCT TO STORE.

For assistance call 1.800.762.1142 toll free. Please have your owner’s manual and serial number available for reference.

For Easiest Assembly:

•To avoid losing any small components or hardware, assemble your product on a hard level surface that does not have cracks or openings.

•Clear an area large enough to layout all components and hardware.

•When applicable, tighten all hardware connections by hand first. Once the step is completed, go back and fully tighten all hardware.

•Follow all steps in order to properly assemble your product.

Step Assemble lid

1A. Attach lid handle to lid using 2 sets of heat resistant washers (G), large washers (F), large lock washers (I), and large wing nuts (D).

B.Attach left top hinge to lid using small screw (A), heat resistant washer (G), small washer (E), small lock washer (H), and small wing nut (C).

C.Attach right top hinge to lid using small screw (A), heat resistant washer (G), small washer (E), small lock washer (H), and small wing nut (C).

Step Unfold legs

2Unfold legs from grill bottom and snap into place.

Step

3

Step

4

Step

5

Attach bottom hinges

A. Attach left bottom hinge to bottom bowl using small screw (A), heat resistant washer (G), small washer (E), small lock washer (H), and small wing nut (C).

B. Attach right bottom hinge to bottom bowl using small screw (A), heat resistant

washer (G), small washer (E), small lock washer (H), and small wing nut (C). Note: Finger tighten hinges into place.

Attach left side handle

Attach left side handle, heat resistant plate and left side handle support to bottom bowl using 2 sets of large washers (F), large lock washers (I), and large wing nuts (D).

Attach right side handle

Attach right side handle, heat resistant plate and right side handle support to bottom bowl using 2 sets of large washers (F), large lock washers (I), and large wing nuts (D).