Contact 1-800-762-1142 for assistance.

Do not return to place of purchase.

Assembly Instructions

General Components & Features

Familiarize yourself with all components before proceeding. Refer to page 4 for all hardware components.

Do NOT attempt assembly unless all components are available. If you believe a component is missing or damaged, contact 1-800-762-1142 for assistance.

Additional Requirements

The following items are not included, but are necessary for the proper assembly of your heater. Do NOT attempt to assemble without proper tools.

(1) - 7/16” Wrench

(1) - #2 Phillips Head Screwdriver

(1)- Leak Detection Solution (Instructions on how to make solution are included in Step 6)

(1)- 20 lb.(4-5 gallon) precision filled LP Gas Grill Cylinder

Note: You must follow all steps to properly assemble heater.

Step 1 – Attach Emitter Screen

•Line up 4 holes on bottom of Emitter Screen with corresponding holes in Emitter Bottom, and insert (4) Medium Screws in holes until tight.

5

Owner’s manual and assembly instructions: 91000 portable outdoor heater

7/02