Contact 1-800-762-1142 for assistance.

Do not return to place of purchase.

Step 2–Attach Top Wire Guard

•Line up 4 prongs on Wire Guard Bottom with 4 holes on Emitter Bottom, and Insert.

Note: It may be necessary to adjust the prongs slightly to line them up with the holes.

Step 3–Attach Dome to Emitter

•Line up three studs in Emitter with holes in Dome. Slide Dome carefully over studs, clamping Top Wire Guard securely in place.

Note: It may be necessary to adjust prongs of the Top Wire Guard slightly to provide a secure fit.

•Install (3) Nuts on studs and tighten with 7/16” wrench. Do not over tighten.

Owner’s manual and assembly instructions: 91000 portable outdoor heater

7/02

6