Contact
Do not return to place of purchase.
Caution:
Before you attempt to use a propane cylinder, understand all cylinder and propane related precautions in Section #1 – “Safety First.”
Step 5 – Gas
Note: For best results, use heater with a 20 lb. cylinder.
The pressure regulator and hose assembly supplied with the appliance must be used and replacements must be those specified by the manufacturer.
Caution:
Your Endless Summer Portable Heater has been checked at all factory connections for leaks. Recheck all connections, as movement in shipping can loosen connections. Check for leaks even if your unit was assembled for you at the store.
To connect 20 lb. Cylinder
•Slip end of flexible gas line with brass fitting through center hole of Base and up to threaded portion of regulator.
•Line up threads on fitting with those on regulator and rotate clockwise until snug. HAND TIGHTEN ONLY. DO NOT USE ANY HAND TOOLS TO MAKE THIS CONNECTION. BE CAREFUL NOT TO CROSS THREADS WHEN SCREWING IN FITTING.
•Set heater on base, making sure that flexible gas line is routed through small slot in base.
•Attach gas line to cylinder by turning black plastic knob counter clockwise into cylinder valve until tight.
Note: Be careful not to kink flexible gas line.
To connect 14.1 oz or 16.4 oz cylinder
Note: Some
•Rotate regulator to point towards opening in shroud.
•Line up threads on canister with those on regulator, insert and rotate canister clockwise until they fit snugly together. HAND TIGHTEN ONLY. BE CAREFUL NOT TO CROSS THREADS WHEN SCREWING IN CANISTER.
Step 6 – Check for Leaks
To check for leaks:
•Make
•Spoon several drops (or use squirt bottle) of the solution onto the regulator/canister connections.
•Inspect the connections and look for bubbles
•If NO bubbles appear, the connection is safe.
•If bubbles appear, there is a leak:
•Loosen and
•
•If you continue to see bubbles after several attempts, disconnect propane source and contact
7 | Owner’s manual and assembly instructions: 91000 portable outdoor heater | 7/02 |