Quick & Easy Assembly
To complete assembly you will need:1 precision-filled standard grill LP gas tank (20#) with external valve threads4 oz. leak check solution - mix 1 part dishwashing soap with 3 parts water1.Attach Post to Base• Slide post into base• Press down until snaps engage2.Install Igniter BatteryOpen battery compartment by turning cap on bottom of engine counter clockwisePlace the supplied AA battery into compartment– negative (-) end goes in firstSecure cap by turning clockwise until it stops

Tip: to locate a retailer in your neighborhood that provides precision-filled tanks, visit www.bluerhino.com or call toll free 1.800.258.7466.

3.Attach Engine to Post• Place engine onto post• Press down until the snaps engage• Slide WaveTrapinto engine• Position FineTunering and lure in placePlace rain cover on engine and twist clockwise to secure4. Install LP gas tankUse only DOT approved 20# tanks with collar fully intact

Place full LP gas tank upright on cart so system is arranged for vapor withdrawal

Secure tank by attaching tank retention chainConnect gas line to tank by turning knob clockwise until it stopsTurn tank ON and test for leaksSpoon leak check solution at all “x” locationsIf any bubbles appear turn tank OFF, reconnect and re-test

If no bubbles appear after one minute turn tank OFF, wipe away solution and proceed

Place cover over tank

X

X

X

X X

Model#CPSV002704

Page 4