page no.

Contact 1.800.762.1142 for assistance. Do not return to place of purchase.

Installing Natural Gas Line

Installation should be done by a qualified service person.

CAUTION: If young children are in the area, a locking valve should be considered.

21 Insert BatteryConnect Natural Gas Line

Before connecting, be sure that there is no debris caught in the head of the natural gas line, head of the grill natural gas line or in the head of the burner and burner ports.

Connect grill natural gas line to natural gas line.

Disconnect Natural Gas Line

Before disconnecting make sure the natural gas line valve is “OFF”.

Disconnect grill natural gas line from natural gas line.

 

 

 

 

 

Operating Instructions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Checking for Leaks

 

Figure 1

Valve

 

 

 

 

 

 

 

NG Gas Valve

 

 

 

 

 

 

 

 

with Orifice

 

Soft Pipe

 

 

 

 

 

Burner Connections

 

 

Connection

 

 

 

 

 

Burner Connections

 

 

 

 

 

 

 

 

 

1. Make sure the regulator valve and hose connections

 

 

 

 

 

 

 

 

 

are securely fastened to the burner and the gas

 

 

 

 

 

 

 

 

 

line.

 

 

 

 

 

 

 

 

 

If your unit was assembled for you, visually check

 

 

 

 

 

 

 

 

 

the connection between the burner venturi pipe and

 

 

 

 

 

 

 

 

 

orifice. Make sure the burner venturi pipe fits over

 

 

Burner

F

 

 

 

 

the orifice.

 

Main Burners

venturi

 

 

x 1

 

WARNING: Failure to inspect this

 

pipe

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

connection or follow these instructions

 

Figure 2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

could cause a fire or an explosion which

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

can cause death, serious bodily injury, or

NG Gas Valve

 

Burner

 

 

 

 

 

damage to property.

with Orifice

 

venturi pipe

 

 

 

 

 

2. Please refer to diagram for proper installation.

 

 

 

 

 

 

 

 

 

(Figure 1 and 2)

 

 

 

 

 

 

 

 

 

3. If the burner pipe does not rest flush to the orifice,

 

 

 

 

 

 

 

 

 

please contact 1.800.762.1142 for assistance.

 

 

 

 

 

 

 

 

 

Tank/Gas Line Connection

 

 

 

 

 

 

 

 

 

1. Make 2-3 oz. of leak solution by mixing one part

NG Gas

 

 

 

 

 

 

 

 

liquid dishwashing soap with three parts water.

 

 

 

 

 

 

 

 

Connection

 

Valve

 

 

 

 

 

2. Make sure control knobs are “OFF”. (Figure 3)

Side Burner

 

 

 

 

 

 

Soft Pipe

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Connection

 

 

 

 

 

3. Turn “ON” natural gas main valve.

 

 

 

 

 

 

 

 

 

4. Spoon leak check solution at all “X” locations

 

Figure 3

 

 

 

 

 

 

 

(Figure 4)

 

 

 

 

 

 

 

 

 

a. If any bubbles appear turn natural gas main valve

 

 

 

 

 

 

 

 

 

“OFF”, reconnect and re-test.

 

 

 

 

 

 

 

 

 

b. If you continue to see bubbles after several

 

 

 

 

 

 

 

 

 

attempts, turn natural gas main valve “OFF”

 

 

 

 

 

 

 

 

 

and disconnect natural gas line and contact

 

 

 

 

 

 

 

 

 

1.800.762.1142 for assistance.

 

 

 

 

 

 

 

 

 

c. If no bubbles appear after one minute turn

 

 

 

 

 

 

 

 

 

natural gas main valve “OFF”, wipe away solution

 

 

 

 

 

 

 

 

 

and proceed.

 

 

 

 

 

 

 

 

 

 

 

 

Figure 4

 

 

 

 

 

 

 

Operating Main Burners

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

First Use

 

 

 

 

 

 

 

 

 

1. Make sure all labels, packaging and protective films

 

 

 

 

 

 

 

 

 

have been removed from the grill.

 

 

 

 

 

 

 

 

 

2. Remove manufacturing oils before cooking on this

 

 

 

 

 

 

 

 

 

grill for the first time, by operating the grill for at

 

 

 

 

 

 

 

 

 

least 15 minutes on “HIGH” with the lid closed. This

 

 

 

 

 

 

 

 

 

will “heat clean” the internal parts and dissipate

 

 

 

 

 

 

 

 

 

odors.