Instructions for ceiling mount: | Instructions for wall mount: |
•Select a dry, indoor location within 2’ of an electrical outlet
•Screw the hanger hook into the ceiling stud
•Hang reel on hook
•Close hook with pliers to keep reel from coming off
•Adjust ball stop to desired length
•Plug power cord into outlet
•Select a dry, indoor location within 2’ of an electrical outlet
•Use wall mount (A) to secure reel to wall
•Place hanger bracket (B) inside wall mount
(A) lining up small hole in bracket
•Insert locking pin (C) through aligned holes
•Plug power cord into outlet
6A, 125V, 750W, 18/2, SJTOW 105° C.
Operating instructions: | Warnings: |
| |
• Plug into any 110 – 120 grounded VAC outlet |
| • | Do not use in wet conditions or places |
• Fully extend and lock cord before use |
| • | Disconnect power before servicing |
• If cord does not lock, pull slowly stopping every | • | Always store indoors | |
4 inches or so. To retract cord, pull out 2‐4 |
| • | Do not allow cord to fly back into the reel |
inches and release cord slowly. |
|
| unrestricted |
• Slide ball stop up and down cord to keep cord |
| • | Do not overload circuit |
where you want it