Maintenance

2.Clean Air Passages

Remove rain cover, sticky trap, FineTune® ring and lure.

Locate all screws and/or bolts that connect engine cover to engine body. See illustration 3.

Note: certain models require you to cut a hole through the labels.

Remove engine cover by removing screws and/or bolts and unplugging lighting.

See illustration 4.

Spray dirty engine body, fan area and

engine cover with glass cleaner (i.e. Windex®) or a citrus based degreaser. See illustration 5.

NOTICE – Never use cleaning fluid or petroleum based fuels and avoid contact with LED lighting and fan motor to avert damage.

Allow cleaners to soak in then wipe all surfaces clean and dry with a cloth. See illustration 6. If there is stubborn build-up, remove it by scrapping with a plastic knife. See illustration 7.

Reconnect LED lighting and plastic engine cover. Replace sticky trap, FineTune® ring, lure and rain cover.

3.Clean Turbo Scoop

Remove WaveDrawerand remove engine from post or cart.

Remove plastic plug in bottom of metal engine by reaching up through exhaust hole. See illustration 8.

Turn engine head upside down to remove debris from turbo scoop.

Replace plastic plug. Place engine back on post or cart and replace WaveDrawer.

4.Reconnect regulator to tank by turning clockwise. Perform leak test before re- starting.

3

4

5

6

7

8

1.888.753.7137

Page 10