To complete assembly you will need:
•1
•4 oz. leak check solution - mix 1 part dishwashing soap with 3 parts water
1. Assemble Cart Frame•Slide front section of cart frame into rear section of frame.
•Attach with bolts, washers and nuts as shown.
•Hand tighten securely.
2.Attach Engine to Post• Place engine onto post.
• Press down until the snaps engage.
• Slide WaveDrawer™ into engine.
• Position FineTune® ring and lure in place.
Tip: to locate a retailer in your neighborhood that provides
•Place full LP gas tank on cart.
•Connect gas line to tank by turning knob clockwise until it stops.
•Turn tank ON and test for leaks:
•Spoon leak check solution where knob and tank valve connect.
•If any bubbles appear turn tank OFF, reconnect and
•If no bubbles appear after one minute turn tank OFF, wipe away solution
and proceed.
•Wrap cover around tank and attach to frame.
4. Attach Rain Cover•Place rain cover over engine and tank.
•Secure in place by twisting FineTune® lock clockwise until it stops.
X
X
X
X X
Model#CPSV003589 | Page 5 |
|
|