Outdoor LP Gas Mosquito Exterminator Model No. SV3500C
Cleaning and Care
CAUTION: All cleaning and maintenance should be done when SkeeterVac® is cool and with the fuel supply disconnected.
CAUTION: DO NOT clean any SkeeterVac® part in a self cleaning oven.
CAUTION: This SkeeterVac® should be thoroughly cleaned and inspected on a regular basis.
CAUTION: Abrasive cleaners will damage this product.
Before Each Use:1. | Keep the SkeeterVac® area clean and free from any |
|
| combustible materials, gasoline, and other flammable |
|
| vapors and liquids. |
|
2. | Do not obstruct the flow of the combustion of LP and the |
|
| ventilation air. |
|
3. | Keep the ventilation opening(s) of the LP gas tank area |
|
| free and clear from debris. |
|
4. | See “Cleaning Instructions” for proper cleaning | LP Gas Tank Ventilation Area |
| instructions. | |
|
|
To ensure maximum performance and to lengthen the life of your SkeeterVac® device, perform these steps each time your tank is empty. This model will consume a standard 20# LP gas tank every
Note: While unit is in use, check the following every
•Check WaveDrawer™ and clean (if necessary).
•Check air passages for blockage.
1.Turn valve on LP gas tank “OFF”.
2.Disconnect hose/regulator gas line from tank by turning knob counterclockwise.
3.Remove empty tank replace with full LP gas tank.
4.Remove WaveDrawer™, empty and clean.
5.Slide WaveDrawer™ back into place.
6.Remove used TacTrap™ and dispose of properly.
7.Slide fresh TacTrap™ in place and remove protective paper.
8.Remove Finetune® cover by turning counterclockwise.
9.Remove used Finetune® lure (if necessary) and properly dispose. Note: Finetune® Lure lasts 60 days.
10.Remove fresh Finetune® lure from package (if necessary). Dispose of packaging properly.
11.Place Finetune® lure back into holder with holes orienting upward.
12.Replace Finetune® cover.
13.Select the lure output by adjusting the Finetune® cover.
14.Check engine and gas lines for any sign of damage or missing parts. Repair any problems before attempting to start.
15.Reconnect gas line to LP gas tank by turning knob clockwise.
16.Remove tank cover from empty LP gas tank and place on full LP gas tank.
17.Perform leak check.
18.Start following “Lighting” instructions.
19.Wash hands with soap and water.
Replacing Igniter BatteryIf you do not hear a clicking sound when the igniter button is depressed, the battery may have lost its charge. Replace battery as follows:
1.Turn LP gas tank valve “OFF”.
2.Open battery compartment by turning cap on bottom of engine counterclockwise.
3.Remove used battery and properly dispose.
4. Place fresh AA battery into compartment – | Battery Placement |
negative |
|
5.Secure cap by turning clockwise until it stops.
6.Start following “Lighting” instructions.
To lengthen the life of your SkeeterVac® device, perform these simple steps at the end of the mosquito season.
1.Turn valve on LP gas tank “OFF”.
2.Disconnect regulator/hose assembly from tank by turning knob counterclockwise.
3.Remove tank cover.
4.Remove LP gas tank and store outdoors away from children and must not be stored in a building, garage or other enclosed area.
5.Remove and properly dispose of the TacTrap™ and FineTune® lure.
6.Cover your SkeeterVac® device to protect from dust and store it in a cool dry place.
CAUTION: Storage of an outdoor gas appliance indoors is only permissible if the tank is disconnected and removed from the outdoor gas appliance.
Product Registration
For faster warranty service, please register your product immediately at www.bluerhino.com or call 1.800.762.1142.
Limited Warranty
Blue Rhino Global Sourcing, LLC (“Vendor”) warrants to the original retail purchaser of this product, and to no other person, that if this product is assembled and operated in accordance with the printed instructions accompanying it, then for a period of one (1) year from the date of purchase, all parts in such product shall be free from defects in material and workmanship. Vendor may require reasonable proof of your date of purchase. Therefore, you should retain your sales slip or invoice. This Limited Warranty shall be limited to the repair or replacement of parts, which prove defective under normal use and service and which Vendor shall determine in its reasonable discretion upon examination to be defective. Before returning any parts, you should contact Vendor’s Customer Service Department using the contact information listed below. If Vendor confirms, after examination, a defect covered by this Limited Warranty in any returned part, and if Vendor approves the claim, Vendor will replace such defective part without charge. If you return defective parts, transportation charges must be prepaid by you. Vendor will return replacement parts to the original retail purchaser, freight or postage prepaid.
This Limited Warranty does not cover any failures or operating difficulties due to accident, abuse, misuse, alteration, misapplication, improper installation or improper maintenance or service by you or any third party, or failure to perform normal and routine maintenance on the product as set out in this owner’s manual. In addition, the Limited Warranty does not cover damage to the finish, such as scratches, dents, discoloration, rust or other weather damage, after purchase.
This Limited Warranty is in lieu of all other express warranties. Vendor disclaims all warranties for products that are purchased from sellers other than authorized retailers or distributors, including the warranty of merchantability or the warranty of fitness for a particular purpose.
VENDOR ALSO DISCLAIMS AND ANY ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. VENDOR SHALL NO LIABILITY TO PURCHASER OR ANY THIRD PARTY FOR ANY SPECIAL, INDIRECT, PUNITIVE, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. Vendor further disclaims any implied or express warranty of, and assumes no responsibility for, defects in workmanship caused by third parties.
This Limited Warranty gives the purchaser specific legal rights; a purchaser may have other rights depending upon where he or she lives. Some jurisdictions do not allow the exclusion or limitation of special, incidental or consequential damages, or limitations on how long a warranty lasts, so the above exclusion and limitations may not apply to everyone.
Vendor does not authorize any person or company to assume for it any other obligation or liability in connection with the sale, installation, use, removal, return, or replacement of its equipment, and no such representations are binding on Vendor.
Blue Rhino Global Sourcing, LLC
Troubleshooting
Problem |
| Possible Cause |
| Prevention/Cure |
Engine will not light |
| Igniter does not work |
| Check battery; replace if |
|
|
|
| necessary |
|
|
|
|
|
|
| No LP gas |
| Check LP gas tank; replace if |
|
|
|
| necessary |
|
|
|
| Hold in control knob for 30 |
|
|
|
| seconds. If it still does not |
|
|
|
| light, please call customer |
|
|
|
| Care. |
If problems can not be correct by using these methods, please contact | ||||
| 1.800.762.1142 for assistance. |
| ||
|
|
|
|
|